Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 233-135-0 | CAS number: 10043-01-3
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu./o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_environmental-fate-and-pathways.png)
Endpoint summary
Administrative data
Description of key information
Additional information
Environmental fate and pathways
Aluminum sulphate is stable and having a high melting point of 770 deg °C .Aluminim sulphate is stable in air, sunlight and to metals.
Solid product is stable for long periods if kept dry and at ambient temperatures. Legal shelf-life of aluminim sulphate is 60 months.
Aluminum sulphate cannot be oxidized and atmospheric transformations would not be expected to occur during transport. If aluminum metal particulates were released to air during metal processing, they would be rapidly oxidized. It is not applicable for an inorganic compound wich dissociates
Aluminum sulphate is an inorganic substance with a relatively large number of oxygen atoms per molecule but no hydrogen or carbon atoms. There are no structural alerts with regard to oxidising potential of the substance.
In air,hydratedaluminum sulfate will react with moisture and produce sulfuric acids, and aluminum oxide. Since these aluminum sulfate is usually not emitted to air, the amount of aluminum present in air would be negligible compared with the amount coming from natural erosion of soil.
Aluminum sulphate which, as an inorganic compound, would not be expected to biodegrade.
Biodegradable matter is generally organic material such as plant and animal matter and other substances originating from living organisms, or artificial materials that are similar enough to plant and animal matter to be put to use by microorganisms.
Hydrolysis is a chemical reaction during which molecules of water (H2O) are split into hydrogen cations (H+, conventionally referred to as protons) and hydroxide anions (OH−) in the process of a chemical mechanism).
When released into water, the aluminum sulphate hydrolyses to form aluminum hydroxides.
Reactions between aluminum sulphate, water and associated “impurities” result in the formation of a floc, which separates from the water phase to form alum sludge. A small fraction of the aluminum can stay in the water in either colloidal or dissolved form.The different reactions involved in the formation of aluminum hydroxide in aqueous solutionwasdescribed; the overall reaction can be represented by the following equation:
Al2(SO4)3+ 6H2O<=>2Al(OH)30+ 3H2SO4
The aluminum hydroxide present in sludge is expected to remain mostly solid following release into surface water.Experiments wereshowed that less than 0.2% of the aluminum hydroxide present in sludge was released in supernatant water at a pH of 6 and less than 0.0013% was released at pH 7.65. In both cases, aluminum hydroxide was present mostly in particulate form. At these pH values, aluminum solubility is low and kinetics favour the formation of solid aluminum hydroxide.
When used to treat sewage water, alum will also react with phosphate, as shown in the following reaction:
Al2(SO4)3+ 2PO43– <=>AlPO4(s) + 3SO42–
This process has been used for many years to treat phosphorus in wastewaters, as well as to reduce phosphorus levels in runoff from land fertilized with poultry litter and restore phosphorus-enriched eutrophic lakes .
Aluminum is a strongly hydrolysing metal and is relatively insoluble in the neutral pH range (6.0–8.0) . In the presence of complexing ligands and under acidic (pH < 6) and alkaline (pH > 8) conditions, aluminum solubility is enhanced. At low pH values, dissolved aluminum is present mainly in the aquo form (Al3+).
Hydrolysis occurs as pH rises, resulting in a series of less soluble hydroxide complexes (e.g., Al(OH)2+, Al(OH)2+). Aluminum solubility is at a minimum near pH 6.5 at 20°C and then increases as the anion, Al(OH)4–, begins to form at higher pH.
Temperature has been shown to influence the solubility, hydrolysis and molecular weight distribution of aqueous aluminum species as well as the pH of solutions.There wasreported a higher degree of aluminum hydrolysis and greater polymerization to high molecular weight species in inorganic aluminum solutions stored for one month at 25°C compared with those stored for an equivalent period at 2°C. The researchers hypothesized that more advanced polymerization evident at the higher temperature resulted in more deprotonation and condensation reactions, possibly accounting for the observed lower pH of the 25°C test solutions (range 4.83 to 5.07 versus 5.64 to 5.78 in the solutions at 2°C).
In water,Aluminum sulphate is likely to disappear rapidly, because of its high water solubility and non- volatility;
Chemical decomposition or phototransformation induced by light or other radiant energy is not possible because Aluminium sulphate as an inorganic compound cannot broken down by photons.
Aluminum sulphate will not degradein surface water and goes into solution without undergoing chemicals decomposition. Aluminium ions will remain as aluminium ions.
When released into water, the aluminum sulphate hydrolyses to form aluminum hydroxides.
Reactions between aluminum sulphate, water and associated “impurities” result in the formation of a floc, which separates from the water phase to form alum sludge. A small fraction of the aluminum can stay in the water in either colloidal or dissolved form.The different reactions involved in the formation of aluminum hydroxide in aqueous solution was described; the overall reaction can be represented by the following equation:
Al2(SO4)3+ 6H2O<=> 2Al(OH)3 0+ 3H2SO4
The aluminum hydroxide present in sludge is expected to remain mostly solid following release into surface water.Experiments were showed that less than 0.2% of the aluminum hydroxide present in sludge was released in supernatant water at a pH of 6 and less than 0.0013% was released at pH 7.65. In both cases, aluminum hydroxide was present mostly in particulate form. At these pH values, aluminum solubility is low and kinetics favour the formation of solid aluminum hydroxide.
When heated between 770 and 860°C Aluminum sulphate decomposes to produce Aluminium oxide and Sulfur trioxide. It combines with water forming hydrated salts of various compositions
Al2(SO4) 770 - 860°C 2Al2O3 + 6SO2 + 3O2
Al2(SO4)3 + 6 NaHCO3 → 3 Na2SO4 + 2 Al(OH)3 + 6 CO2
Levels of background oxygen in surface water also indicate a lack of significant degradation.
Aluminium sulphate will bioaccumulate in aquatic and terrestrial species
Numerous field and laboratory studies have demonstrated that fish accumulate aluminum (as aluminium sulphate) in and on the gill. It has been suggested that the rate of transfer of aluminum (as aluminium sulphate) into the body of fish is either slow or negligible under natural environmental conditions . The initial uptake of aluminum (as aluminium sulphate) by fish essentially takes place not on the gill surface but mainly on the gill mucous layer.
Fish may rapidly eliminate mucus and the bound aluminum following the exposure episode.There wasfound that depuration of aluminum from the gills of Atlantic salmon (Salmo salar) was extremely rapid once fish were transferred into clean water. The authors suggested that the rapid loss is due to expulsion of aluminum bound to mucus.
In Atlantic salmon (Salmo salar), steady state BCFs of 76 and 190 were reported after a 60-day exposure and BCFs of 362 after a45-day exposure to aluminium (aluminium sulphate) at pH 5.6 to 5.8.
A BCF of 155 has also been reported in rainbow trout (Oncorhynchus mykiss) gill tissue after a 3-day exposure to aluminium (as aluminium sulphate).
Steady-state BCF values as high as 14,000 have been reported in Asellus aquaticus after a 20-day exposure to aluminium (as aluminium sulphate). However, much of the accumulation was due to passive adsorption of aluminium onto the cuticle. Therefore, these BCFs are not representative of the internal concentration of aluminium and over estimate accumulation in this species.
A steady state BCF of 19,000 has been reported for the gut tissue of the fresh water snail Lymnaea stagnalis. However, the gut of the snail contains mucus that has a high affinity for metals such as aluminium. The mucus can be excreted and may be a primary route for the removal of metals from the snails. It was reported that mucus may have remained during the analysis of the gut and so this BCF may overestimate the accumulation of aluminium A BCF of 155 has also been reported in rainbow trout (Oncorhynchus mykiss) gill tissue after a 3-day exposure to aluminium (as aluminium sulphate) in this species.
A BCF of 0.13 to 0.5 in the whole body for the snail Helix aspersa has been reported.
BCFs for terrestrial plants were calculated based on data cited in the review by Bélanger et al. (1999). For both hardwood and coniferous species, the calculated BCF ranged from 5 to 1,300 for foliage and from 20 to 79,600 for roots in studies done with aluminum solutions. For those conducted with soil, BCFs were lower for both foliage (0.03–1.3) and roots (325–3,526). BCFs calculated for grain and forage crops ranged from 4 to 1,260 infoliage and from 200 to 6,000 in roots for experiments done with solutions. For soil experiments, the foliar BCF varied from 0.07 to 0.7.
The estimated BCF of 3.16 L/kg wet-wt was measured by calculation from EPI SuiteTM v4.0 Program. This is Exposure Assessment Tools and Models made from EPA (Environmental Protection Agency) .
BCFBAF Program (v3.00) Results:
==============================
SMILES : [Al](O)S(=O)(=O)O(=O)S(O(=O))(=O)=OS(O([Al]))(=O)=O
CHEM :aluminium sulphate
MOL FOR: H4 O12 S3 Al2
MOL WT : 346.17
--------------------------------- BCFBAF v3.00 --------------------------------
Summary Results:
Log BCF (regression-based estimate): 0.50 (BCF = 3.16 L/kg wet-wt)
Biotransformation Half-Life (days) : 1.48e-005 (normalized to 10 g fish)
Log BAF (Arnot-Gobas upper trophic): -0.05 (BAF = 0.893 L/kg wet-wt)
Log Kow (experimental): not available from database
Log Kow used by BCF estimates: -7.82
Equation Used to Make BCF estimate:
Log BCF = 0.50
Correction(s): Value
Correction Factors Not Used for Log Kow < 1
Estimated Log BCF = 0.500 (BCF=3.162 L/kg wet-wt)
The estimatedBCF (upper trophic) of 0.893 L/kg wet-wt was measured by calculation from EPI SuiteTM v4.0 Program. This is Exposure Assessment Tools and Models made from EPA (Environmental Protection Agency) .
Summary Results:
Log BCF (regression-based estimate): 0.50 (BCF = 3.16 L/kg wet-wt)
Biotransformation Half-Life (days) : 1.48e-005 (normalized to 10 g fish)
Log BAF (Arnot-Gobas upper trophic): -0.05 (BAF = 0.893 L/kg wet-wt)
Log Kow (experimental): not available from database
Log Kow used by BCF estimates: -7.82
Equation Used to Make BCF estimate:Log BCF = 0.50
Correction(s): Value
Correction Factors Not Used for Log Kow < 1
Estimated Log BCF (upper trophic) = -0.049 (BCF = 0.893 L/kg wet-wt)
Adsorption of aluminium occurs only under pH conditions where it hydrolyzes togive various hydrolysis products.Progressive hydrolysis leads to the formation of colloidalaluminium hydroxide.
The rate at which soluble aluminium sulphate are gradually leached away is dependent upon the water supply. In humid regions, the upper layers of soil and rock are kept thoroughly leached, and as fast as they are formed the soluble products are removed in the drainage water. In semi-arid regions, the soils are not fully leached and soluble substances tend to accumulate.
When dissolved in a large amount of neutral or slightly-alkaline water, aluminium sulfate hydrolyzes to form the aluminium hydroxide precipitate(Al(OH)3) and a dilute sulfuric acid solutionandreduce the pH of soil.
The anhydrous form occurs naturally as a rare mineral millosevichite, found e.g. in volcanic environments and on burning coal-mining waste dumps. Aluminium sulfate is rarely, if ever, encountered as the anhydrous salt. It forms a number of different hydrates, of which the hexadecahydrate Al2(SO4)3•16H2O and octadecahydrate Al2(SO4)3•18H2O are the most common. The heptadecahydrate, whose formula can be written as [Al(H2O)6]2(SO4)3•5H2O, occurs naturally as the mineral alunogen.
The above information indicates that aluminium sulphate has a propensity to leach through soil if water is applied, i.e. it does have mobility through soil, and providing sufficient water is present. As it moves downwards into layers where the water content is low, the leaching will stop.
On this basis, it does not have a high potential for adsorption to soil if water is not present andonly part of thealuminium sulphatein the solid phase is adsorbed.
On the other basis if water is present aluminium sulphate as aluminium hydroxide precipitate (Al(OH)3) have a high potential for adsorption to soil.
- soil, the colloidal surface can adsorb large quantities of aluminium
Selectivity of cation adsorption
The affinity of most cations for anadsorbingsurface is greater for divalent than for monovalent ions, and for large cations than for small ones of the same charge because the larger the cation the less hydrated it is. The usual affinity is:
Al3+> Ba2+>Sr2+>Ca2+>Mg2+= Cs+>Rb+>K+= NH4+>Na+
The soil cations that are readily adsorbed onto soil colloids can be divided ino two groups. Firstly there are thebase catoins,which include the important plant nutrients Ca2+, Mg2+ ,K+and Na+. Secondly there areacid cations,which include Al3+and H+. Related to this distinction in cations is the term base saturation, which is defined as the proportion of exchange sites occupied by base cations. A soil with a high base saturation (greater than 35%) is more fertile than a soil with a low base saturation.
Al3+, Ca2+and H+are the commonly adsorbed cations in humid regions. This reflects the long-term leaching loss of basic cations and their replacement by acidic cations. In contrast, Ca2+,Mg2+, K+and Na+are the commonly adsorbed cations in arid regions.
Aluminium influences of soil acidity
As clay minerals weather and break down, the aluminium in the octahedral layer is released into the soil solution, where it either reacts with water or isadsorbedonto the exchange sites of negatively charged clay minerals. Al3+ions are adsorbed in preference to all the other major cations. The influence that aluminium has on soil acidy is itself dependant on the acidity of the soil. At Ph less 5, aluminium is soluble and exists as Al3+. When Al3+enters the soil solution it reacts with water (it is hydrolysed) to produce H+ions:
Al3++ H2O <===> AlOH2++ H+
Thus the acidity of the soil increases (pH falls). In soils with a pH of between 5 and 6.5, aluminium also contributes H+oins to the soil solution but by different mechanisms, as aluminium can no longer exist as Al3+ions but is converted to aluminium hydroxyl ions:
Al3++ OH-<===> AlOH2+
AlOH2++H-<===> Al(OH)2+
ALUMINIUM HYDROXY IONS
These hydroxyl aluminium ions act as exchangeable cations just like Al3+, and are adsorbed by the clay minerals. They are in equilibrium with hydroxyl aluminium ions in the soil solution, where they produce H+ions by the following reactions:
AlOH2++H20 <===> Al(OH)2+ + H+
Al(OH)2++H20 <===> Al(OH)3+ + H+
In soils where the pH is above 7 Ca2+and Mg2+dominated the exchange sites and most of the hydroxyl aluminium ions have been converted to gibbsite (Al(OH)3), is insoluble and cannot be by the negative clay minerals as no charge. In a neutral soil the exchangeable cations that dominate the cation exchange sites are the base cations, whereas in an acidics soils aluminium and hydrogen ions dominate the exchange sites.
On this basis if water is present aluminium sulphate as aluminium hydroxide precipitate (Al(OH)3) have a high potential for adsorption to soil.
If released into water, aluminium sulphate is not expected to adsorb to suspended solids and sediment based upon the Koc. The Koc of aluminium sulphate can be estimated to be 75.41. This estimated Koc value suggests that Aluminium sulphate is expected to have very high mobility in soil.
These results suggest that Aluminium sulphate has high soil mobility and does not have a high potential for adsorption to soil.
The estimated Soil Adsorption Coefficient was 75.41 L/kg measured by calculation from EPI SuiteTM v4.0..This is Exposure Assessment Tools and Models made from EPA (Environmental Protection Agency).
Koc Estimate from MCI:
---------------------
First Order Molecular Connectivity Index ........... : 7.431
Non-Corrected Log Koc (0.5213 MCI + 0.60) .......... : 4.4734
Fragment Correction(s):
2 Miscellaneous S(=O) group .......... : -2.5960
Corrected Log Koc .................................. : 1.8774
Estimated Koc: 75.41 L/kg <===========
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)