Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 223-445-4 | CAS number: 3896-11-5
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu./o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_manufacture-use-and-exposure.png)
Uses at industrial sites
Documentsopen allclose all
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 1: Adhesives, sealants
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 6: Calendering operations
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Conversion into Articles by extrusion
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- Conversion into Articles by extrusion
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use resulting in inclusion into or onto a matrix
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Additive premixing
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Calendering operations
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Spraying in industrial settings and applications
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Drum/batch transfers; Non-dedicated facility
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Drum/batch transfers; Dedicated facility
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Roller application or brushing of adhesive and other coating
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 30: Photo-chemicals
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
- Environmental release category (ERC):
- ERC9a: Widespread use of functional fluid (indoor)
- Environmental release category (ERC):
- ERC9b: Widespread use of functional fluid (outdoor)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 24: Lubricants, greases, release products
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 10: Roller application or brushing
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 6: Calendering operations
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Production of Plastic Articles
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Production of Plastic Articles - Use in an Open Converting Process (e.g. Calendering)
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Production of Plastic Articles - Handling Large Containers Containing Masterbatches and/or Compounds
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Production of Plastic Articles - Handling Large Containers Containing Additives
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Production of Plastic Articles - Handling Small Containers Containing Masterbatches and/or Compounds
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Production of Plastic Articles - Handling Small Containers Containing Additives
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Production of Plastic Articles - Use in a Foaming Production
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Name of activity / technique:
- Production of Plastic Articles - Use in Dip Coating
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Production of Plastic Articles - Use in an Closed and/or Semi-Open Converting Process (e.g. Extrusion, Injection)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Production of Plastic Articles - Laboratory / Quality Control Operations
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Production of Plastic Articles - Scrap Recycling
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Product category used:
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
- Environmental release category (ERC):
- ERC9a: Widespread use of functional fluid (indoor)
- Environmental release category (ERC):
- ERC9b: Widespread use of functional fluid (outdoor)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- bumetrizole / 2-tert-butyl-6-(5-chloro-2H-benzotriazol-2-yl)-4-methylphenol / 3896-11-5
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: bulk
- Reference substance:
- bumetrizole / 2-tert-butyl-6-(5-chloro-2H-benzotriazol-2-yl)-4-methylphenol / 3896-11-5
- Name of activity / technique:
- Adh/SealIndUsePaper
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Name of activity / technique:
- Adh/SealIndUsePaper - Adhesives & Sealants industrial use paper
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Adh/SealIndUsePaper - Adhesives & Sealants industrial use paper
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Adh/SealIndUsePaper - Adhesives & Sealants industrial use paper
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Adh/SealIndUsePaper - Adhesives & Sealants industrial use paper
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Adh/SealIndUsePaper - Adhesives & Sealants industrial use paper
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Adh/SealIndUsePaper - Adhesives & Sealants industrial use paper
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Adh/SealIndUsePaper - Adhesives & Sealants industrial use paper
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Adh/SealIndUsePaper - Adhesives & Sealants industrial use paper
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Adh/SealIndUsePaper - Adhesives & Sealants industrial use paper
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Adh/SealIndUsePaper - Adhesives & Sealants industrial use paper
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Adh/SealIndUsePaper - Adhesives & Sealants industrial use paper
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 1: Adhesives, sealants
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 13: Treatment of articles by dipping and pouring
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- bumetrizole / 2-tert-butyl-6-(5-chloro-2H-benzotriazol-2-yl)-4-methylphenol / 3896-11-5
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: bulk
- Reference substance:
- bumetrizole / 2-tert-butyl-6-(5-chloro-2H-benzotriazol-2-yl)-4-methylphenol / 3896-11-5
- Name of activity / technique:
- Uses at industrial sites
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Name of activity / technique:
- Uses at industrial sites - Industrial use resulting in inclusion into or onto a matrix (IW-2)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Uses at industrial sites - Industrial use resulting in inclusion into or onto a matrix (IW-2)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Uses at industrial sites - Industrial use resulting in inclusion into or onto a matrix (IW-2)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Uses at industrial sites - Industrial use resulting in inclusion into or onto a matrix (IW-2)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Uses at industrial sites - Industrial use resulting in inclusion into or onto a matrix (IW-2)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Uses at industrial sites - Industrial use resulting in inclusion into or onto a matrix (IW-2)
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Uses at industrial sites - Industrial use resulting in inclusion into or onto a matrix (IW-2)
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Uses at industrial sites - Industrial use resulting in inclusion into or onto a matrix (IW-2)
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Uses at industrial sites - Industrial use resulting in inclusion into or onto a matrix (IW-2)
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Uses at industrial sites - Industrial use resulting in inclusion into or onto a matrix (IW-2)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Uses at industrial sites - Industrial use resulting in inclusion into or onto a matrix (IW-2)
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Uses at industrial sites - Industrial use resulting in inclusion into or onto a matrix (IW-2)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Uses at industrial sites - Industrial use resulting in inclusion into or onto a matrix (IW-2)
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Uses at industrial sites - Industrial use resulting in inclusion into or onto a matrix (IW-2)
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC12a: Processing of articles at industrial sites with low release
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 6: Calendering operations
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC12a: Processing of articles at industrial sites with low release
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 1: Adhesives, sealants
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Blending into polymer
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- Blending into polymer
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 13: Treatment of articles by dipping and pouring
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- bumetrizole / 2-tert-butyl-6-(5-chloro-2H-benzotriazol-2-yl)-4-methylphenol / 3896-11-5
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: bulk
- Reference substance:
- bumetrizole / 2-tert-butyl-6-(5-chloro-2H-benzotriazol-2-yl)-4-methylphenol / 3896-11-5
- Name of activity / technique:
- Adh/SealIndUseTransport
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Name of activity / technique:
- Adh/SealIndUseTransport - Adhesives & Sealants industrial use transport
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Adh/SealIndUseTransport - Adhesives & Sealants industrial use transport
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Adh/SealIndUseTransport - Adhesives & Sealants industrial use transport
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Adh/SealIndUseTransport - Adhesives & Sealants industrial use transport
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Adh/SealIndUseTransport - Adhesives & Sealants industrial use transport
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Adh/SealIndUseTransport - Adhesives & Sealants industrial use transport
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Adh/SealIndUseTransport - Adhesives & Sealants industrial use transport
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Adh/SealIndUseTransport - Adhesives & Sealants industrial use transport
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Adh/SealIndUseTransport - Adhesives & Sealants industrial use transport
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Adh/SealIndUseTransport - Adhesives & Sealants industrial use transport
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Adh/SealIndUseTransport - Adhesives & Sealants industrial use transport
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- bumetrizole / 2-tert-butyl-6-(5-chloro-2H-benzotriazol-2-yl)-4-methylphenol / 3896-11-5
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: bulk
- Reference substance:
- bumetrizole / 2-tert-butyl-6-(5-chloro-2H-benzotriazol-2-yl)-4-methylphenol / 3896-11-5
- Name of activity / technique:
- Production of Plastic Articles
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Name of activity / technique:
- Production of Plastic Articles - Handling Small Containers Containing Masterbatches and/or Compounds
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Production of Plastic Articles - Handling Large Containers Containing Masterbatches and/or Compounds
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Production of Plastic Articles - Handling Small Containers Containing Additives
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Production of Plastic Articles - Handling Large Containers Containing Additives
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Production of Plastic Articles - Use in an Closed and/or Semi-Open Converting Process (e.g. Extrusion, Injection)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Production of Plastic Articles - Use in an Open Converting Process (e.g. Calendering)
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Production of Plastic Articles - Use in a Foaming Production
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Name of activity / technique:
- Production of Plastic Articles - Use in Dip Coating
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Production of Plastic Articles - Scrap Recycling
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Production of Plastic Articles - Laboratory / Quality Control Operations
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 6: Calendering operations
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 1: Adhesives, sealants
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
- Environmental release category (ERC):
- ERC9a: Widespread use of functional fluid (indoor)
- Environmental release category (ERC):
- ERC9b: Widespread use of functional fluid (outdoor)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Process category (PROC):
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
- Environmental release category (ERC):
- ERC9a: Widespread use of functional fluid (indoor)
- Environmental release category (ERC):
- ERC9b: Widespread use of functional fluid (outdoor)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC12a: Processing of articles at industrial sites with low release
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 6: Calendering operations
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 1: Adhesives, sealants
- Sector of end use:
- SU 0: Other: SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 6: Calendering operations
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- bumetrizole / 2-tert-butyl-6-(5-chloro-2H-benzotriazol-2-yl)-4-methylphenol / 3896-11-5
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: bulk
- Reference substance:
- bumetrizole / 2-tert-butyl-6-(5-chloro-2H-benzotriazol-2-yl)-4-methylphenol / 3896-11-5
- Name of activity / technique:
- Industrial use of additive resulting in inclusion into a matrix, including application in coatings, adhesives and plastics
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Name of activity / technique:
- Industrial use of additive resulting in inclusion into a matrix, including application in coatings, adhesives and plastics - ED: CoatIndUse
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Industrial use of additive resulting in inclusion into a matrix, including application in coatings, adhesives and plastics - ED: CoatIndUse
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Industrial use of additive resulting in inclusion into a matrix, including application in coatings, adhesives and plastics - ED: CoatIndUse
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Industrial use of additive resulting in inclusion into a matrix, including application in coatings, adhesives and plastics - ED: CoatIndUse
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Industrial use of additive resulting in inclusion into a matrix, including application in coatings, adhesives and plastics - ED: CoatIndUse
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Industrial use of additive resulting in inclusion into a matrix, including application in coatings, adhesives and plastics - ED: CoatIndUse
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Industrial use of additive resulting in inclusion into a matrix, including application in coatings, adhesives and plastics - ED: CoatIndUse
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Industrial use of additive resulting in inclusion into a matrix, including application in coatings, adhesives and plastics - ED: CoatIndUse
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- PC 18: Ink and toners
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 1: Adhesives, sealants
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 6: Calendering operations
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
- Environmental release category (ERC):
- ERC9a: Widespread use of functional fluid (indoor)
- Environmental release category (ERC):
- ERC9b: Widespread use of functional fluid (outdoor)
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC10b: Widespread use of articles with high or intended release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Environmental release category (ERC):
- ERC11b: Widespread use of articles with high or intended release (indoor)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Sector of end use:
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use resulting in inclusion into or onto a matrix
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Additive premixing
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Calendering operations
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Drum/batch transfers; Non-dedicated facility
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Drum/batch transfers; Dedicated facility
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Product category used:
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 10: Roller application or brushing
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of additive resulting in inclusion into a matrix, including application in coatings, adhesives and plastics
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Industrial use of additive resulting in inclusion into a matrix, including application in coatings, adhesives and plastics - ED: CoatIndUse
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Industrial use of additive resulting in inclusion into a matrix, including application in coatings, adhesives and plastics - ED: CoatIndUse
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Industrial use of additive resulting in inclusion into a matrix, including application in coatings, adhesives and plastics - ED: CoatIndUse
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Industrial use of additive resulting in inclusion into a matrix, including application in coatings, adhesives and plastics - ED: CoatIndUse
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Industrial use of additive resulting in inclusion into a matrix, including application in coatings, adhesives and plastics - ED: CoatIndUse
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Industrial use of additive resulting in inclusion into a matrix, including application in coatings, adhesives and plastics - ED: CoatIndUse
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Industrial use of additive resulting in inclusion into a matrix, including application in coatings, adhesives and plastics - ED: CoatIndUse
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Industrial use of additive resulting in inclusion into a matrix, including application in coatings, adhesives and plastics - ED: CoatIndUse
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- PC 18: Ink and toners
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 0: Other: SU 3 Industrial Manufacturing (all)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)