Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 203-439-8 | CAS number: 106-89-8
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu./o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_environmental-fate-and-pathways.png)
Biodegradation in water and sediment: simulation tests
Administrative data
Link to relevant study record(s)
- Endpoint:
- biodegradation in water: sewage treatment simulation testing
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 2006-09-25
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- other: Study was not conducted in conformance to GLP and OECD guidelines.
- Qualifier:
- according to guideline
- Guideline:
- other: EPA method for assessing the biodegradability of compounds in biological treatment units (40 CFR 63, 2001)
- Principles of method if other than guideline:
- Study design was based on the EPA method for assessing the biodegradability of compounds in biological treatment units (40 CFR 63, 2001).
40 CFR 63 Subparts F, G, H, I – Hazardous Organic NESHAP (HON). 2001. Procedures & Test Methods: Appendix C to Part 63- Determination of Fraction Biodegraded (Fbio) in a Biological Treatment Unit. Section D Batch Tests Epi(Procedure 4). - GLP compliance:
- no
- Specific details on test material used for the study:
- Details on properties of test surrogate or analogue material (migrated information):
not applicable - Oxygen conditions:
- aerobic
- Inoculum or test system:
- activated sludge, industrial, adapted
- Details on source and properties of surface water:
- see below.
- Details on source and properties of sediment:
- Primary biodegradation of epichlorohydrin was evaluated using activated sludge from either the Specialties or Chlorohydrin wastewater treatment plants (WWTPs) in Freeport, Texas. Activated sludge samples were collected from each plant and shipped to the TERC (Toxicology & Environmental Research and Consulting) laboratory in Midland, Michigan. Sludge samples were diluted 1/5 (volume basis) with high salts (NaCl) mineral medium alone or mixed in sealed test vessels with authentic influent wastewaters from the Specialties and Chlorohydrin treatment plants. Sodium chloride was added to the mineral media to approximate the ionic strength of the wastewater streams to the WWTPs. Epichlorohydrin was added to the test systems at a nominal concentration of 60 mg/L and the reaction mixtures were continuously stirred for 24 hours at ambient temperature (22 ± 3ºC). Samples of
the reaction mixtures were periodically analyzed for residual epichlorohydrin using gas chromatography with mass spectrometry detection. - Details on inoculum:
- see above.
- Duration of test (contact time):
- 24 h
- Test performance:
- Rapid degradation of epichlorohydrin was observed in reaction mixtures prepared with activated sludge samples from both the Specialties and Chlorohydrin wastewater treatment plants in Texas Operations. Within two hours in Specialties sludge, epichlorohydrin concentrations decreased from 49 mg/L to non-detected levels in sludge diluted in mineral medium alone, and from 48 mg/L to 0.7 mg/L in sludge diluted in wastewater and mineral medium. In contrast, the concentration of epichlorohydrin remaining in the biologically inhibited controls diluted in mineral medium alone showed no change over the same time period (2 h), while the concentration decreased from 61 to 48 mg/L in the biologically inhibited controls diluted in wastewater and mineral medium.
- Compartment:
- other: water / sediment, material (mass) balance
- Remarks on result:
- other: not applicable
- % Degr.:
- 56.3
- Parameter:
- test mat. analysis
- Sampling time:
- 1 h
- Remarks on result:
- other: Mineral medium
- % Degr.:
- > 98
- Parameter:
- test mat. analysis
- Sampling time:
- 2 h
- Remarks on result:
- other: Below detection limit of 1 mg/L. Mineral medium
- % Degr.:
- ca. 0
- Parameter:
- test mat. analysis
- Sampling time:
- 1 h
- Remarks on result:
- other: biologically inhibited control of mineral medium
- % Degr.:
- ca. 0
- Parameter:
- test mat. analysis
- Sampling time:
- 2 h
- Remarks on result:
- other: biologically inhibited control of mineral medium
- % Degr.:
- 15.6
- Parameter:
- test mat. analysis
- Sampling time:
- 4 h
- Remarks on result:
- other: biologically inhibited control of mineral medium
- % Degr.:
- 62.8
- Parameter:
- test mat. analysis
- Sampling time:
- 1 h
- Remarks on result:
- other: Wastewater + Mineral Medium
- % Degr.:
- 98.5
- Parameter:
- test mat. analysis
- Sampling time:
- 2 h
- Remarks on result:
- other: Wastewater + Mineral Medium
- % Degr.:
- 6.9
- Parameter:
- test mat. analysis
- Sampling time:
- 1 h
- Remarks on result:
- other: biologically inhibited control of Wastewater + Mineral Medium
- % Degr.:
- 22.1
- Parameter:
- test mat. analysis
- Sampling time:
- 2 h
- Remarks on result:
- other: biologically inhibited control of Wastewater + Mineral Medium
- % Degr.:
- 27.7
- Parameter:
- test mat. analysis
- Sampling time:
- 4 h
- Remarks on result:
- other: biologically inhibited control of Wastewater + Mineral Medium
- Transformation products:
- not measured
- Details on transformation products:
- Degradation products were not identified.
- Details on results:
- The biodegradation rate constant kb, corrected for abiotic losses, was 0.001 L/(mg h) in sludge diluted in mineral medium alone, and 0.0012 L/(mg h) in sludge diluted in wastewater and mineral medium. These results indicate that including authentic wastewater in the reaction mixtures with the mineral medium had little effect on the biodegradation rate of epichlorohydrin.
Biodegradation of epichlorohydrin was also rapid in Chlorohydrin sludge diluted in a mixture of wastewater and mineral medium. Within one hour, the concentration of epichlorohydrin decreased from 28 mg/L to non-detected levels, while little change occurred in the biologically inhibited controls (decreasing from 52 mg/L to 48 mg/L over one hour). Note the low concentration of epichlorohydrin measured at time 0, in a sample collected 15 minutes after test compound addition. This value (i.e., 28 mg/L), compared to the nominal 60 mg/L added, indicates that very rapid biodegradation began immediately upon addition of the test compound to the test system. The biodegradation rate constant kb, corrected for abiotic losses, was
0.007 L/(mg h).
Oxygen concentrations were monitored in the headspace of the individual reaction mixtures in order to ensure the degradation reactions were not oxygen limited. In the Specialties and Chlorohydrin sludge experiment, the O 2 concentration in the headspace of the viable reaction mixtures was at least 16% or higher within the first five to six hours of incubation indicating that the degradation reactions were not O 2 limited. Also, neither the test compound, epichlohydrin, nor the authentic wastewater proved toxic or inhibitory to the Specialties and Chlorohydrin activated sludge since little difference was noted in the decrease in oxygen concentrations between the blanks, test, viability, and toxicity control mixtures.
Although epichlorohydrin levels reached non detect levels in the viable reaction mixtures within 6 h, O 2 levels in the headspace were monitored for an additional 18 h in order to evaluate the robustness of the test system. In the Specialties sludge reaction mixture with mineral medium alone, O2 levels were maintained around 16-17% after 24 h. In contrast, after 24 h O2 levels in the viable reaction mixtures mixed with authentic wastewater decreased to ~11% even though these reactions were fortified with supplemental oxygen after 6 h. These results were not surprising as the authentic wastewater likely contained a significant oxygen demand. Texas Operations’ laboratory reported total organic carbon (TOC) values of 631 and 211 ppm for the Specialties and Chlorohydrin wastewater samples, respectively.
In both studies, the pH of the viable reaction mixtures decreased during incubation. The pH of viable mixtures in the Specialties sludge decreased from approximately pH 7.8 at the start of the study to the pH range of 7.0 to 7.5 after 24 hours. Similarly, the pH of the viable mixtures in the Chlorohydrin sludge decreased from approximately pH 7.4 at the start of the study to the pH range of 6.6 to 6.8 after 24 hours. These decreases in pH (less than 1 pH unit) were not likely to affect the viability of the activated sludge. - Results with reference substance:
- Some biodegradation of the dipropylene glycol (DPG) reference compound was observed in the Specialties sludge. After one day of incubation, 34% of the DPG added to the viability control was degraded based on DOC removal. In addition, 22% of the DOC from DPG and epichlorohydrin was degraded in the toxicity control after 24 hours. This slow biodegradation of DPG observed in the Specialties sludge suggests that for studies of short duration (i.e. 24 hours), DPG may not be an optimum reference compound to assess the viability of the activated sludge and inhibitory potential of the test compound. As noted above, measurement of oxygen consumption may be a more sensitive indicator. Thus, for the Chlorohydrin sludge experiment, oxygen consumption was used to assess the viability of the activated sludge and inhibitory potential of epichlorohydrin.
- Conclusions:
- Approximately 99% of epichlorohydrin was degraded within two hours in the reaction mixtures.
- Executive summary:
Epichlorohydrin is a common wastewater constituent found in the Specialties and Chlorohydrin wastewater treatment plants at The Dow Chemical Company’s Texas Operations in Freepor t, Texas. Primary biodegradation of epichlorohydrin was evaluated using activated sludge from either the Specialties or Chlorohydrin wastewater treatment plants (WWTPs). Activated sludge samples were collected from each plant and shipped to the TERC (Toxicology & Environmental Research and Consulting) laboratory in Midland, Michigan. Sludge samples were diluted 1/5 (volume basis) with high salts (NaCl) mineral medium alone or mixed in sealed test vessels with authentic influent wastewaters from the Specialties and Chlorohydrin treatment plants. Sodium chloride was added to the mineral media to approximate the ionic strength of the wastewater streams to the WWTPs. Epichlorohydrin was added to the test systems at a nominal concentration of 60 mg/L and the reaction mixtures were continuously stirred for 24 hours at ambient temperature (22 ± 3ºC). Samples of the reaction mixtures were periodically analyzed for residual epichlorohydrin using gas chromatography with mass spectrometry detection. Within two hours of initiation of the reactions, greater than 99% of the epichlorohydrin was degraded in the viable reaction mixtures prepared from the Specialties and Chlorohydrin sludge samples. In contrast, loss or degradation of epichlorohydrin in biologically inhibited controls (sodium azide added as chemical sterilant) was limited to 21% or less in two hours, confirming that the degradation observed in the viable mixtures was primarily biologically mediated. Biodegradation rate constants in Specialties sludge mixtures were determined to be 0.001 L/(mg h) in reaction mixtures prepared with mineral medium and 0.0012 L/(mg h) in reaction mixtures prepared with mineral medium mixed with authentic Specialties wastewater. In the Chlorohydrin sludge mixtures, a biodegradation rate constant of 0.007 L/(mg h) was calculated for a reaction mixture prepared with mineral medium mixed with authentic wastewater.
- Endpoint:
- biodegradation in water: sewage treatment simulation testing
- Type of information:
- experimental study
- Adequacy of study:
- supporting study
- Reliability:
- 2 (reliable with restrictions)
- Rationale for reliability incl. deficiencies:
- other: No data on GLP, guideline type study, limited documentation
- Qualifier:
- equivalent or similar to guideline
- Guideline:
- other: Method for the determination of the biodegradability of surfactants used in synthetic detergents, OECD 1976
- Deviations:
- yes
- Remarks:
- The process is run under anaerobic conditions with NO3 as terminal H acceptor. This allows one to investigate the degradation of volatile substances without incurring losses due to stripping
- Principles of method if other than guideline:
- Organization of Economic Cooperation and Development OECDI. Environment Directorate Proposed Method for the Determination of the Biodegradability of Surfactants used in Synthetic Detergents, Paris l976.
- GLP compliance:
- not specified
- Radiolabelling:
- no
- Oxygen conditions:
- other: under closed, denitrifying conditions to avoid loss from stripping
- Inoculum or test system:
- activated sludge (adaptation not specified)
- Details on inoculum:
- no data.
- Duration of test (contact time):
- 3 h
- Initial conc.:
- 20 mg/L
- Based on:
- test mat.
- % Degr.:
- < 10
- Parameter:
- other: Cl elimination
- Sampling time:
- 3 h
- % Degr.:
- 35
- Parameter:
- other: Cl elimination
- Sampling time:
- 24 h
- % Degr.:
- 75
- Parameter:
- other: Cl elimination
- Sampling time:
- 48 h
- % Degr.:
- 95
- Parameter:
- other: Cl eliminaiton
- Sampling time:
- 96 h
- Transformation products:
- not measured
- Conclusions:
- Study documents elimination likely due to mineralisation as Chlorine is released under non-standard (denitrifying) condition.
- Executive summary:
The incubations were done under denitrifying conditions to avoid loss by aeration, hence the results (35% in 24 hr and 75% in 48 hours) were given without a stripping effect. When the incubations were continued for 96 hours total, 91% biodegradation occurred. BOD30 was estimated as 97% of Theoretical Oxygen Demand (ThOD).
Referenceopen allclose all
Rapid primary biodegradation of epichlorohydrin was measured in activated sludge from both the Specialties and Chlorohydrin wastewater treatment plants (WWTPs) in Texas Operations.
The incubations were done under denitrifying conditions to avoid loss by aeration, hence the results (35% in 24 hr and 75% in 48 hours) were given without a stripping effect. When the incubations were continued for 96 hours total, 91% biodegradation occurred. BOD30 was estimated as 97% of Theoretical Oxygen Demand (ThOD).
Description of key information
Key value for chemical safety assessment
Additional information
Elimination of Epichlorohydrin in the aqueous phase of a sewage treatment plant has been simulated in two studies. Volatilisation has been controlled by the use of closed vessels. One study followed the EPA method for assessing the biodegradability of compounds in biological treatment units (40 CFR 63, 2001) and used an inoculum from an industrial waste water treatment plant that is exposed to waste water containing Epichlorohydrin, the other used unadapted inoculum under denitrifying conditions. In the study with adapted inoculum, rapid elimination was observed (based on test material analysis) at an exposure time typical for a sewage water treatment plant (less than 1 mg/l after 2 hrs). Under denitrifying conditions, elimination after 3 hours (relevant residence time for a sewage treatment plant) was <10%, significant elimination (95%) was reached after 96 h. The results suggest a rapid elimination from STP with sludge that is accommodated to emission of Epichlorohydrin and delayed elimination for unadapted sludge.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)