Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 201-353-5 | CAS number: 81-48-1
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu./o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_manufacture-use-and-exposure.png)
Uses at industrial sites
Documentsopen allclose all
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Name:
- 1-hydroxy-4-(p-toluidino)anthraquinone
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- 1-hydroxy-4-(p-toluidino)anthraquinone
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 0: Other: Printing by jetting or screen application
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9c: Finger paints
- PC 18: Ink and toners
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6b: Manufacture of pulp, paper and paper products
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Uses at industrial sites
- Name:
- Disperse Blue 72
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Disperse Blue 72
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Process category (PROC):
- PROC 10: Roller application or brushing
- PROC 0: Other: Printing by jetting or screen application
- Product category used:
- PC 18: Ink and toners
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 7: Printing and reproduction of recorded media
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Mixing and blending
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- Mixing and blending
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Product category used:
- PC 18: Ink and toners
- PC 23: Leather treatment products
- PC 26: Paper and board treatment products
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Name:
- 1-hydroxy-4-(p-toluidino)anthraquinone
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- 1-hydroxy-4-(p-toluidino)anthraquinone
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Process category (PROC):
- PROC 6: Calendering operations
- PROC 7: Industrial spraying
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 23: Leather treatment products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- ERC5: Use at industrial site leading to inclusion inot/onto article
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- PROC 1: Use in closed process, no likelihood of exposure
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- PROC 2: Use in closed, continuous process with occasional controlled exposure
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- PROC 3: Use in closed batch process (synthesis or formulation)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- PROC 5: Mixing and blending in batch processes for formulation of preparations and article (multistage and/or significant contact)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- PROC 6: calendering operations
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- PROC 8b: Transfer of substance or preparation (charging/discharging) from /to vessel/large containers at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- PROC:9 Transfer of substance or preparation into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- PROC 14: Production of preparations or articles by tabletting, compression, extrusion, pelletisation
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- PROC 15: Use as laboratory agent
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- PROC 21: Low energy manipulation of substances bound in material and/or articles
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
ContribScenWorkersRepopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- solid (material with no or very low dustiness)
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- solid (material with no or very low dustiness)
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- solid (material with no or very low dustiness)
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- solid (material with no or very low dustiness)
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- solid (material with no or very low dustiness)
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- solid (material with no or very low dustiness)
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- solid (material with no or very low dustiness)
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- solid (material with no or very low dustiness)
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- solid (material with no or very low dustiness)
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- solid (material with no or very low dustiness)
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- solid (material with no or very low dustiness)
Amounts used (or contained in articles), frequency and duration of use/exposure
Conditions and measures related to personal protection, hygiene and health evaluation
Effectiveness
- Route affected:
- dermal
Other conditions affecting workers exposure
- Place of use:
- indoor
Exposure of workers
ExpEstopen allclose all
- Type of exposure:
- dermal (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
- Type of exposure:
- inhalation (external) long-term exposure
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- ECETOC TRA workers
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure
or processes with equivalent containment conditions
PROC 2: Chemical production or refinery in closed continuous process with occasional
controlled exposure or processes with equivalent containment conditions
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes
with occasional controlled exposure or processes with equivalent containment conditions
PROC 4: Chemical production where opportunity for exposure arises
PROC 5: Mixing or blending in batch processes
PROC 6: Calendering operations
PROC 7: Industrial spraying
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated
facilities
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
PROC 10: Roller application or brushing
PROC 13: Treatment of articles by dipping and pouring
PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
PROC 21: Low energy manipulation of substances bound in materials and/or articles - Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 7: Industrial spraying
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Manual maintenance (cleaning and repair) of machinery
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 18: Ink and toners
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6b: Manufacture of pulp, paper and paper products
- Subsequent service life relevant for this use:
- no
industrial formulation/application of colorant products for plastics (master batches and converters)
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 3
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Transfer into small containers
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- Transfer into small containers
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 18: Ink and toners
- PC 23: Leather treatment products
- PC 26: Paper and board treatment products
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Use in paper production
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- Use in paper production
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Product category used:
- PC 26: Paper and board treatment products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6b: Manufacture of pulp, paper and paper products
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Name:
- 1-hydroxy-4-(p-toluidino)anthraquinone
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- 1-hydroxy-4-(p-toluidino)anthraquinone
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 7: Industrial spraying
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 12: Use of blowing agents in manufacture of foam
- PROC 13: Treatment of articles by dipping and pouring
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 18: Ink and toners
- PC 23: Leather treatment products
- PC 26: Paper and board treatment products
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 11: Manufacture of rubber products
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Product category used:
- PC 18: Ink and toners
- PC 23: Leather treatment products
- PC 26: Paper and board treatment products
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Production of plastic articles
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Use of substance in the production of plastic articles
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use of substance in the production of plastic articel in closed continous process
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use of substance in the production of plastic articles in closed batch processes
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use of substance in mixing and blending
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Calendering operations
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Transfer of substance in dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Transfer of substance or mixture in small containers
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Use of substance in the production of plastic articles
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Use of substance as laboratory reagent
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Use of substance in low energy manipulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Use of substance in high mechanical energy work-up
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Manual maintenance (cleaning and repair) of machinery
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Conditions and measures related to Biological Sewage Treatment Plant
- Biological Sewage Treatment Plant (STP):
- municipal biological STP
Conditions and measures related to external treatment of waste (including article waste)
- Particular considerations on the waste treatment operations:
- no
Other conditions affecting environmental exposure
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
- Release from the site to::
- wastewater
- Release estimation method:
- ERC
- Release from the site to::
- ambient air
- Release estimation method:
- ERC
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- ERC
Exposure of the environment
PECopen allclose all
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- air
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- top predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (terrestrial)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
Exposure of humans via the environment
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
ContribScenWorkersRepopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- solid (unspecified form)
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- solid (unspecified form)
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- solid (unspecified form)
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- solid (unspecified form)
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- solid (unspecified form)
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- solid (unspecified form)
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- solid (unspecified form)
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- solid (unspecified form)
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- solid (unspecified form)
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- solid (unspecified form)
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- solid (unspecified form)
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial spraying
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Product category used:
- PC 18: Ink and toners
- PC 23: Leather treatment products
- PC 26: Paper and board treatment products
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Calendering operations
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- Calendering operations
- Process category (PROC):
- PROC 6: Calendering operations
- Product category used:
- PC 18: Ink and toners
- PC 26: Paper and board treatment products
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 10: Roller application or brushing
- Product category used:
- PC 18: Ink and toners
- PC 23: Leather treatment products
- PC 26: Paper and board treatment products
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Production of plastic articles
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- PROC 1: Use in closed process, no likelihood of exposure
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- PROC 2: Use in closed, continuous process with occasional controlled exposure
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- PROC 3: Use in closed batch process (synthesis or formulation)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- PROC 4: Use in batch and other process (synthesis) where opportunity of exposure arises
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- PROC 5: Mixing and blending in batch processes for formulation of preparations and article (multistage and/or significant contact)
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- PROC 8b: Transfer of substance or preparation (charging/discharging) from /to vessel/large containers at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- PROC:9 Transfer of substance or preparation into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- PROC 13: Treatment of articles by dripping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- PROC 14: Production of preparations or articles by tabletting, compression, extrusion, pelletisation
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- PROC 21: Low energy manipulation of substances bound in material and/or articles
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Product category used:
- PC 18: Ink and toners
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6b: Manufacture of pulp, paper and paper products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- production of plastic articles
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- use of substance in the production of plastic articles
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- use of substance in the production of plastic articles in closed continous process
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- use of substance in the production of plastic articles in closed batch process
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- use of substance in mixing and blending
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- calendering operations
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- transfer of substance in dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- transfer of substance or mixture in small containers
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- use of substance in the production of plastic articles
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- use of substance in low energy manipulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- use of substance in high mechanical energy work-up
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Production of plastic articles
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Use of substance in the production of plastic articles
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use of substance in the production of plastic articel in closed continous process
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use of substance in the production of plastic articles in closed batch processes
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Use of substance in mixing and blending
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Calendering operations
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Transfer of substance in dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Transfer of substance or mixture in small containers
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Use of substance in the production of plastic articles
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Use of substance in low energy manipulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Manual maintenance (cleaning and repair) of machinery
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 18: Ink and toners
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6b: Manufacture of pulp, paper and paper products
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Contributing scenario for the environment (related to workers activities)
Conditions of use for the environment
Conditions and measures related to Biological Sewage Treatment Plant
- Biological Sewage Treatment Plant (STP):
- municipal biological STP
Conditions and measures related to external treatment of waste (including article waste)
- Particular considerations on the waste treatment operations:
- no
Other conditions affecting environmental exposure
Releases to waste and the environment
Release to the environment
ReleaseEnvirRepopen allclose all
- Release from the site to::
- wastewater
- Release estimation method:
- ERC
- Release from the site to::
- ambient air
- Release estimation method:
- ERC
- Release from the site to::
- non-agricultural soil
- Release estimation method:
- ERC
Exposure of the environment
PECopen allclose all
- Exposed compartment:
- freshwater
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- marine water
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sediment (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- sewage treatment plant
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- air
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- agricultural soil
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (freshwater)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- top predators' prey (marine water)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
- Exposed compartment:
- predators' prey (terrestrial)
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
Exposure of humans via the environment
- Exposure estimation method:
- exposure estimation tool
- Exposure estimation tool name:
- EUSES
ContribScenWorkersRepopen allclose all
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Contributing scenario for the workers
Conditions of use for workers
Product (article) characteristics
- Physical form of the used product:
- liquid, including paste/slurry/suspension
Amounts used (or contained in articles), frequency and duration of use/exposure
Technical and organisational conditions and measures
Technical and organisational conditions
Effectiveness
- Route affected:
- inhalation
Other conditions affecting workers exposure
- Place of use:
- indoor
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9c: Finger paints
- PC 18: Ink and toners
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 0: Other: SU 3
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Name:
- 1-hydroxy-4-(p-toluidino)anthraquinone
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- 1-hydroxy-4-(p-toluidino)anthraquinone
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure
or processes with equivalent containment conditions
PROC 2: Chemical production or refinery in closed continuous process with occasional
controlled exposure or processes with equivalent containment conditions
PROC 3: Manufacture or formulation in the chemical industry in closed batch processes
with occasional controlled exposure or processes with equivalent containment conditions
PROC 5: Mixing or blending in batch processes
PROC 6: Calendering operations
PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated
facilities
PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
PROC 15: Use as laboratory reagent
PROC 21: Low energy manipulation of substances bound in materials and/or articles
PROC 24: High (mechanical) energy work-up of substances bound in materials and/or
articles - Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Manual maintenance (cleaning and repair) of machinery
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Name:
- 1-hydroxy-4-(p-toluidino)anthraquinone
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- 1-hydroxy-4-(p-toluidino)anthraquinone
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Process category (PROC):
- PROC 6: Calendering operations
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 7: Industrial spraying
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 18: Ink and toners
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Dipping and pouring
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Dipping and pouring
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Dipping and pouring
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 18: Ink and toners
- PC 23: Leather treatment products
- PC 26: Paper and board treatment products
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)