Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 236-675-5 | CAS number: 13463-67-7
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu./o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_manufacture-use-and-exposure.png)
Uses at industrial sites
Documentsopen allclose all
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- - Use of titanium dioxide in electronics and ceramics
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of the solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Mixing of the solid substance
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Mixing of the subtance in liquid form
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Powder spraying operation (fully automated)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 7: Industrial spraying
- Name of activity / technique:
- Spraying operation inclosed system
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 7: Industrial spraying
- Name of activity / technique:
- Industrial spraying of the subtsance in liquid form
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Treatment of articles by dipping and poruing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Tabletting, compression, extruison, pelletisation
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Hot temperature process
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Name of activity / technique:
- Packaging of massive objects
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Sector of end use:
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of liquid substance
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Mixing or blending in batch processes
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Hot temperature process
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Name of activity / technique:
- Grinding
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Packaging
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Cleaning and maintenance
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Sector of end use:
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 23: Leather treatment products
- PC 26: Paper and board treatment products
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of titanium dioxide in electronics and ceramics
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of the solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Mixing of the solid substance
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Mixing of the substance in liquid form
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Powder spraying operation (fully automated)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 7: Industrial spraying
- Name of activity / technique:
- Spraying operation in closed system
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Industrial spraying of the substance in liquid form
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Tabletting, compression, extrusion, pelletisation
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Hot temperature process
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Name of activity / technique:
- Packaging of massive objects
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Sector of end use:
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 16: Use of fuels
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Process category (PROC):
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 20: Use of functional fluids in small devices
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Process category (PROC):
- PROC 27a: Production of metal powders (hot processes)
- Process category (PROC):
- PROC 27b: Production of metal powders (wet processes)
- Product category used:
- PC 0: Other: pigment for a processing aid (enzyme)
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6b: Manufacture of pulp, paper and paper products
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Regulatory status:
- use in cosmetics products
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 39: Cosmetics, personal care products
- Sector of end use:
- SU 0: Other: Manufacture of cosmetic products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 7: Industrial spraying
- Product category used:
- PC 7: Base metals and alloys
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 21: Laboratory chemicals
- PC 33: Semiconductors
- Sector of end use:
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Anatase
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Anatase
- Name:
- Rutile
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Rutile
- Name:
- Titanium Dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Titanium Dioxide
- Name:
- Titanium Dioxide non-classified
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: bulk
- Reference substance:
- Titanium Dioxide non-classified
- Name:
- titanium dioxide-anatase-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-anatase-pigment grade
- Name:
- titanium dioxide-rutile-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-rutile-pigment grade
- Name:
- titanium dioxide-rutile-pigment grade-stabilization by alumina
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-rutile-pigment grade-stabilization by alumina
- Name:
- Titanium dioxide-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Titanium dioxide-pigment grade
- Name:
- titanium dioxide-uncoated anatase-nano grade (CG100)
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- titanium dioxide-uncoated anatase-nano grade (CG100)
- Type of information reported:
- single nanoform
- Name of nanoform:
- CG100, PK20
- Name of set of nanoforms:
- Titanium dioxide - Nano Set 7 Anatase uncoated
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 - ca. 100 %
- Shape category:
- spheroidal
- Percentile:
- D10
- Typical value:
- ca. 11.4 nm
- Range:
- >= 10.6 - <= 12.1 nm
- Percentile:
- D50
- Typical value:
- ca. 15.8 nm
- Range:
- >= 15.3 - <= 16.3 nm
- Percentile:
- D90
- Typical value:
- ca. 20.7 nm
- Range:
- >= 19.9 - <= 21.5 nm
- Typical length:
- ca. 21 nm
- Range of length:
- >= 20.4 - <= 21.6 nm
- Typical aspect ratio (:1):
- ca. 1.3 :1
- Range of aspect ratio (:1):
- >= 1.2 - <= 1.4
- Fraction of constituent particles in the size range 1-100 nm:
- ca. 100 - ca. 100 %
- Structure:
- crystalline
- Name:
- anatase
- Pure structure:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 - ca. 100 %
- Crystal system:
- tetragonal
- Bravais lattice:
- body - centred tetragonal
- Typical specific surface area:
- ca. 100 m²/g
- Range of specific surface area:
- > 75 - < 120 m²/g
- Surface treatment applied:
- no
- Does the set contain both treated and non-surface treated nanoforms?:
- no
- Name:
- titanium dioxide-uncoated anatase-nano grade (CG300)
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- titanium dioxide-uncoated anatase-nano grade (CG300)
- Type of information reported:
- single nanoform
- Name of nanoform:
- CG300
- Name of set of nanoforms:
- Titanium dioxide - Nano Set 7 Anatase uncoated
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 - ca. 100 %
- Shape category:
- spheroidal
- Percentile:
- D10
- Typical value:
- ca. 5.1 nm
- Range:
- >= 5 - <= 5.2 nm
- Percentile:
- D50
- Typical value:
- ca. 5.5 nm
- Range:
- >= 5.4 - <= 5.7 nm
- Percentile:
- D90
- Typical value:
- ca. 6.5 nm
- Range:
- >= 6.2 - <= 6.8 nm
- Typical length:
- ca. 6.5 nm
- Range of length:
- >= 6.3 - <= 6.6 nm
- Typical aspect ratio (:1):
- ca. 1.17 :1
- Range of aspect ratio (:1):
- >= 1.1 - <= 1.2
- Fraction of constituent particles in the size range 1-100 nm:
- ca. 100 - ca. 100 %
- Structure:
- crystalline
- Name:
- anatase
- Pure structure:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 - ca. 100 %
- Crystal system:
- tetragonal
- Bravais lattice:
- body - centred tetragonal
- Typical specific surface area:
- ca. 300 m²/g
- Range of specific surface area:
- > 250 - < 350 m²/g
- Surface treatment applied:
- no
- Does the set contain both treated and non-surface treated nanoforms?:
- no
- Name of activity / technique:
- Industrial use of titanium dioxide in polymerisation processes for textile grades
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Name of activity / technique:
- Handling of the solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Mixing
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Handling of the substance in liquid form
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Polymerisation and further processing
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Referenceopen allclose all
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC5: Use at industrial site leading to inclusion into/onto article
- ERC6a: Use of intermediate
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 12: Use of blowing agents in manufacture of foam
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 16: Use of fuels
- PROC 17: Lubrication at high energy conditions in metal working operations
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 20: Use of functional fluids in small devices
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 25: Other hot work operations with metals
- PROC 26: Handling of solid inorganic substances at ambient temperature
- PROC 27a: Production of metal powders (hot processes)
- PROC 27b: Production of metal powders (wet processes)
- Product category used:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 4: Anti-freeze and de-icing products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 13: Fuels
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 40: Extraction agents
- PC41: Oil and gas exploration or production products
- PC42: Electrolytes for batteries
- Sector of end use:
- SU 1: Agriculture, forestry and fishing
- SU 2a: Mining (without offshore industries)
- SU 2b: Offshore industries
- SU 4: Manufacture of food products
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- SU 24: Scientific research and development
- SU 0: Other: SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 1: Adhesives, sealants
- Sector of end use:
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC5: Use at industrial site leading to inclusion into/onto article
- ERC6a: Use of intermediate
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 16: Use of fuels
- PROC 17: Lubrication at high energy conditions in metal working operations
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 20: Use of functional fluids in small devices
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- PROC 26: Handling of solid inorganic substances at ambient temperature
- PROC 27a: Production of metal powders (hot processes)
- PROC 27b: Production of metal powders (wet processes)
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 7: Industrial spraying
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 18: Ink and toners
- Sector of end use:
- SU 1: Agriculture, forestry and fishing
- SU 2a: Mining (without offshore industries)
- SU 2b: Offshore industries
- SU 4: Manufacture of food products
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of titanium dioxide-containing rubber or plastic articles industrial settings
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of pellet and/or flakes
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Handling of medium dusty materials (including micronized materials)
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of high dusty materials
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Mixing and blending of substance in liquid form
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Mixing or blending of solid substance
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Quality control of substance in liquid form
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Quality control of solid substance
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Powder spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Extrusion
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Elevated temperature processes
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Foaming
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Name of activity / technique:
- Packaging of massive objects
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC5: Use at industrial site leading to inclusion into/onto article
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 30: Photo-chemicals
- PC 37: Water treatment chemicals
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 0: Other: Uses of substances as such or in preparation at industrial sites
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 16: Use of fuels
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Process category (PROC):
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 20: Use of functional fluids in small devices
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Process category (PROC):
- PROC 27a: Production of metal powders (hot processes)
- Process category (PROC):
- PROC 27b: Production of metal powders (wet processes)
- Product category used:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 4: Anti-freeze and de-icing products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 13: Fuels
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 19: Intermediate
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 40: Extraction agents
- Sector of end use:
- SU 0: Other: SU3: Industrial uses: Uses of substances as such or in preparations at industrial sites
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 16: Use of fuels
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Process category (PROC):
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 20: Use of functional fluids in small devices
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Process category (PROC):
- PROC 27a: Production of metal powders (hot processes)
- Process category (PROC):
- PROC 27b: Production of metal powders (wet processes)
- Product category used:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 4: Anti-freeze and de-icing products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 13: Fuels
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 19: Intermediate
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 40: Extraction agents
- Sector of end use:
- SU 1: Agriculture, forestry and fishing
- SU 2a: Mining (without offshore industries)
- SU 2b: Offshore industries
- SU 4: Manufacture of food products
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- Industrial use of processing aids in processes and products, not becoming part of articles
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Name of activity / technique:
- Industrial use resulting in manufacture of another substance (use of intermediates)
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Name of activity / technique:
- Industrial use of reactive processing aids
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Use in closed process, no likelihood of exposure
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in closed, continuous process with occasional controlled exposure (e.g. sampling)
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in closed batch process (synthesis or formulation)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Use in batch and other process (synthesis) where opportunity for exposure arises
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of fillers, putties, plasters and modelling clay
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Mixing or blending in batch processes
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Handling of liquid substance
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Packaging
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Cleaning and maintenance
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 9b: Fillers, putties, plasters, modelling clay
- Sector of end use:
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of titanium dioxide in the paper industry
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Name of activity / technique:
- Further processing
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Mixing or blending
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Handling of the substance in liquid form
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Handling of the solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category used:
- PC 26: Paper and board treatment products
- Sector of end use:
- SU 6b: Manufacture of pulp, paper and paper products
- SU 18: Manufacture of furniture
- SU 0: Other: packaging, including board
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC5: Use at industrial site leading to inclusion into/onto article
- ERC6a: Use of intermediate
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 12: Use of blowing agents in manufacture of foam
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 16: Use of fuels
- PROC 17: Lubrication at high energy conditions in metal working operations
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 20: Use of functional fluids in small devices
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 25: Other hot work operations with metals
- PROC 26: Handling of solid inorganic substances at ambient temperature
- PROC 27a: Production of metal powders (hot processes)
- PROC 27b: Production of metal powders (wet processes)
- Product category used:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 4: Anti-freeze and de-icing products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 13: Fuels
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 40: Extraction agents
- Sector of end use:
- SU 1: Agriculture, forestry and fishing
- SU 2a: Mining (without offshore industries)
- SU 2b: Offshore industries
- SU 4: Manufacture of food products
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- SU 24: Scientific research and development
- SU 0: Other: SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 18: Ink and toners
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Anatase
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Anatase
- Name:
- Rutile
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Rutile
- Name:
- Titanium Dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Titanium Dioxide
- Name:
- Titanium Dioxide non-classified
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: bulk
- Reference substance:
- Titanium Dioxide non-classified
- Name:
- titanium dioxide-anatase-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-anatase-pigment grade
- Name:
- titanium dioxide-rutile-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-rutile-pigment grade
- Name:
- titanium dioxide-rutile-pigment grade-stabilization by alumina
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-rutile-pigment grade-stabilization by alumina
- Name:
- Titanium dioxide-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Titanium dioxide-pigment grade
- Name:
- titanium dioxide-uncoated anatase-nano grade (CG100)
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- titanium dioxide-uncoated anatase-nano grade (CG100)
- Type of information reported:
- single nanoform
- Name of nanoform:
- CG100, PK20
- Name of set of nanoforms:
- Titanium dioxide - Nano Set 7 Anatase uncoated
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 - ca. 100 %
- Shape category:
- spheroidal
- Percentile:
- D10
- Typical value:
- ca. 11.4 nm
- Range:
- >= 10.6 - <= 12.1 nm
- Percentile:
- D50
- Typical value:
- ca. 15.8 nm
- Range:
- >= 15.3 - <= 16.3 nm
- Percentile:
- D90
- Typical value:
- ca. 20.7 nm
- Range:
- >= 19.9 - <= 21.5 nm
- Typical length:
- ca. 21 nm
- Range of length:
- >= 20.4 - <= 21.6 nm
- Typical aspect ratio (:1):
- ca. 1.3 :1
- Range of aspect ratio (:1):
- >= 1.2 - <= 1.4
- Fraction of constituent particles in the size range 1-100 nm:
- ca. 100 - ca. 100 %
- Structure:
- crystalline
- Name:
- anatase
- Pure structure:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 - ca. 100 %
- Crystal system:
- tetragonal
- Bravais lattice:
- body - centred tetragonal
- Typical specific surface area:
- ca. 100 m²/g
- Range of specific surface area:
- > 75 - < 120 m²/g
- Surface treatment applied:
- no
- Does the set contain both treated and non-surface treated nanoforms?:
- no
- Name:
- titanium dioxide-uncoated anatase-nano grade (CG300)
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- titanium dioxide-uncoated anatase-nano grade (CG300)
- Type of information reported:
- single nanoform
- Name of nanoform:
- CG300
- Name of set of nanoforms:
- Titanium dioxide - Nano Set 7 Anatase uncoated
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 - ca. 100 %
- Shape category:
- spheroidal
- Percentile:
- D10
- Typical value:
- ca. 5.1 nm
- Range:
- >= 5 - <= 5.2 nm
- Percentile:
- D50
- Typical value:
- ca. 5.5 nm
- Range:
- >= 5.4 - <= 5.7 nm
- Percentile:
- D90
- Typical value:
- ca. 6.5 nm
- Range:
- >= 6.2 - <= 6.8 nm
- Typical length:
- ca. 6.5 nm
- Range of length:
- >= 6.3 - <= 6.6 nm
- Typical aspect ratio (:1):
- ca. 1.17 :1
- Range of aspect ratio (:1):
- >= 1.1 - <= 1.2
- Fraction of constituent particles in the size range 1-100 nm:
- ca. 100 - ca. 100 %
- Structure:
- crystalline
- Name:
- anatase
- Pure structure:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 - ca. 100 %
- Crystal system:
- tetragonal
- Bravais lattice:
- body - centred tetragonal
- Typical specific surface area:
- ca. 300 m²/g
- Range of specific surface area:
- > 250 - < 350 m²/g
- Surface treatment applied:
- no
- Does the set contain both treated and non-surface treated nanoforms?:
- no
- Name of activity / technique:
- Industrial use of titanium dioxide in the paper industry
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Name of activity / technique:
- Handling of the solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of the substance in liquid form
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Mixing or blending
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Further processing
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 26: Paper and board treatment products
- Sector of end use:
- SU 6b: Manufacture of pulp, paper and paper products
- SU 18: Manufacture of furniture
- SU 0: Other: Packaging, including board, paper laminate
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Referenceopen allclose all
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC5: Use at industrial site leading to inclusion into/onto article
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Painting
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- painting
- Process category (PROC):
- PROC 7: Industrial spraying
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- Sector of end use:
- SU 2b: Offshore industries
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Uses at industrial sites as coloring agents
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- Uses at industrial sites as coloring agents
- Process category (PROC):
- PROC 0: Other: Substance not classified hence use descriptors not appropriate
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 26: Handling of solid inorganic substances at ambient temperature
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 2: Adsorbents
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of titanium dioxide in polymerisation processes for textile grades
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Raw material handling of solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Mixing and blending
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Handling of substance in liquid form
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Polymerisation and further processing
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Insignificant exposure via the following route:
- oral
- dermal
- eye
- inhalatory
- Insignificant release via the following route:
- water
- air
- soil
- waste
- Pattern of exposure:
- occasional
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial Use as a Colouring agent
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- ERC6a: Use of intermediate
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workers
- Name of activity / technique:
- Worker Contributing Scenario
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 12: Use of blowing agents in manufacture of foam
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 16: Use of fuels
- PROC 17: Lubrication at high energy conditions in metal working operations
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 20: Use of functional fluids in small devices
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 25: Other hot work operations with metals
- PROC 26: Handling of solid inorganic substances at ambient temperature
- PROC 27a: Production of metal powders (hot processes)
- PROC 27b: Production of metal powders (wet processes)
- Product category used:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 4: Anti-freeze and de-icing products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 13: Fuels
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 40: Extraction agents
- PC 0: Other: PC 19
- Sector of end use:
- SU 1: Agriculture, forestry and fishing
- SU 2a: Mining (without offshore industries)
- SU 2b: Offshore industries
- SU 4: Manufacture of food products
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- SU 24: Scientific research and development
- SU 0: Other: SU 3,10, 21, 22
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of titanium dioxide-containing rubber or plastic articles industrial setting
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of liquid substance
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Mixing and blending
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Quality control
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Calendering
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- High energy processes
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Extrusion
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Foaming
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Name of activity / technique:
- Packaging
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Cleaning and maintenance
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of titanium dioxide as deNOx catalyst
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of liquid substance
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Mixing or blending in batch processes
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Sintering
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Name of activity / technique:
- Cleaning and maintenance
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of titanium dioxide in the paper industry
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Raw material handling of solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Raw material handling of substance in liquid form
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Mixing or blending
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 26: Paper and board treatment products
- Sector of end use:
- SU 6b: Manufacture of pulp, paper and paper products
- SU 18: Manufacture of furniture
- SU 0: Other: Packaging, including board, paper laminate
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of titanium dioxide in coil coating
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of the solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of the substance in liquid form
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Mixing
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Roller-coating
- Process category (PROC):
- PROC 6: Calendering operations
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Roller-coating in closed systems
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 6: Calendering operations
- PROC 10: Roller application or brushing
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- Sector of end use:
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 16: Use of fuels
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Process category (PROC):
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 20: Use of functional fluids in small devices
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Process category (PROC):
- PROC 27a: Production of metal powders (hot processes)
- Process category (PROC):
- PROC 27b: Production of metal powders (wet processes)
- Product category used:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 4: Anti-freeze and de-icing products
- PC 7: Base metals and alloys
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 13: Fuels
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 40: Extraction agents
- Sector of end use:
- SU 1: Agriculture, forestry and fishing
- SU 2a: Mining (without offshore industries)
- SU 2b: Offshore industries
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 1: Adhesives, sealants
- Sector of end use:
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC6a: Use of intermediate
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 0: Other: Catalysts
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 0: Other: Catalyst
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Rutile
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Rutile
- Name:
- Anatase
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Anatase
- Name:
- Titanium Dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Titanium Dioxide
- Name of activity / technique:
- Intermediate use of titanium dioxide in the manufacture of frits and glass
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Name of activity / technique:
- Handling of solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Mixing of the solid substance
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Hot temperature process
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Referenceopen allclose all
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- 1
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- 5
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- 2
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- 3
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- 4
- Process category (PROC):
- PROC 10: Roller application or brushing
- Product category used:
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- production of an infrared-active viscose fibre
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- Raw material handling
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 0: Other: Textiles
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of titanium dioxide-containing rubber or plastic articles industrial setting
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of liquid substance
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Mixing and blending
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Quality control
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Calendering
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- High energy processes
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Extrusion
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Foaming
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Name of activity / technique:
- Packaging
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Cleaning and maintenance
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- Sector of end use:
- SU 14: Manufacture of basic metals, including alloys
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of titanium dioxide as deNOx catalyst
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Name of activity / technique:
- Sintering
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Flow coating
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Mixing
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Handling of the substance in liquid form
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Handling of the solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Name:
- Titanium dioxide-Rutile
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: bulk
- Reference substance:
- Titanium dioxide-Rutile
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 16: Use of fuels
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Process category (PROC):
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 20: Use of functional fluids in small devices
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Process category (PROC):
- PROC 27a: Production of metal powders (hot processes)
- Process category (PROC):
- PROC 27b: Production of metal powders (wet processes)
- Product category used:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 4: Anti-freeze and de-icing products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 13: Fuels
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 19: Intermediate
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 40: Extraction agents
- Sector of end use:
- SU 1: Agriculture, forestry and fishing
- SU 2a: Mining (without offshore industries)
- SU 2b: Offshore industries
- SU 4: Manufacture of food products
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of titanium dioxide-containing sealants and adhesives
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of the substance in liquid form
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Closed batch process
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Extrusion
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Industrial spraying of the substance in liquid form
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Wet cleaning
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 1: Adhesives, sealants
- Sector of end use:
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 19: Building and construction work
- SU 20: Health services
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for workers
- Process category (PROC):
- PROC 0: Other: No PROC required in section 3.5, based on REACH Art. 10 a (iii)
- Sector of end use:
- SU 0: Other: No SU required in section 3.5, based on REACH Art. 10 a (iii)
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Production of coloured leads, cosmetic leads and wax crayons by pressing or extrusion
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 18: Ink and toners
- PC 26: Paper and board treatment products
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- PC 39: Cosmetics, personal care products
- Sector of end use:
- SU 6a: Manufacture of wood and wood products
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Titanium Dioxide non-classified
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: bulk
- Reference substance:
- Titanium Dioxide non-classified
- Name:
- titanium dioxide-anatase-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-anatase-pigment grade
- Name:
- titanium dioxide-rutile-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-rutile-pigment grade
- Name:
- titanium dioxide-rutile-pigment grade-stabilization by alumina
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-rutile-pigment grade-stabilization by alumina
- Name:
- Titanium dioxide-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Titanium dioxide-pigment grade
- Name of activity / technique:
- Intermediate use of titanium dioxide in the manufacture of frits and glass
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Name of activity / technique:
- Handling of the solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Mixing of the solid substance
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Hot temperature process
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Referenceopen allclose all
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 26: Handling of solid inorganic substances at ambient temperature
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Titanium dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Titanium dioxide
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Process category (PROC):
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Subsequent service life relevant for this use:
- yes
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 18: Ink and toners
- Sector of end use:
- SU 7: Printing and reproduction of recorded media
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC5: Use at industrial site leading to inclusion into/onto article
- ERC6a: Use of intermediate
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 12: Use of blowing agents in manufacture of foam
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 16: Use of fuels
- PROC 17: Lubrication at high energy conditions in metal working operations
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 20: Use of functional fluids in small devices
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 25: Other hot work operations with metals
- PROC 26: Handling of solid inorganic substances at ambient temperature
- PROC 27a: Production of metal powders (hot processes)
- PROC 27b: Production of metal powders (wet processes)
- Product category used:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 4: Anti-freeze and de-icing products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 13: Fuels
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 40: Extraction agents
- Sector of end use:
- SU 1: Agriculture, forestry and fishing
- SU 2a: Mining (without offshore industries)
- SU 2b: Offshore industries
- SU 4: Manufacture of food products
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 23: Leather treatment products
- PC 26: Paper and board treatment products
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 18: Ink and toners
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Regulatory status:
- use in cosmetics products
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 39: Cosmetics, personal care products
- Sector of end use:
- SU 0: Other: Manufacture of Cosmetics Products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 0: Other: UCN code P15500 (Catalyst)
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Pigment in printing ink
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- Pigment in printing ink
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Environmental release category
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Process category
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 2: Adsorbents
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 0: Other: Catalysts
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 0: Other: Catalyst
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Name of activity / technique:
- use at industrial site leading to inclusion into/onto articles
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Name of activity / technique:
- use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- mixing or blending in batch processes
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- transfer of substance or mixture at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- transfer of substance or mixture including weighing
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 11: Manufacture of rubber products
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of titanium dioxide in electronics and ceramics
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of the solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Mixing of the solid substance
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Mixing of the substance in liquid form
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Powder spraying operation (fully automated)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 7: Industrial spraying
- Name of activity / technique:
- Spraying operation in closed system
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 7: Industrial spraying
- Name of activity / technique:
- Industrial spraying of the substance in liquid form
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Tabletting, compression, extrusion, pelletisation
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Hot temperature process
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Name of activity / technique:
- Packaging of massive objects
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Product category used:
- PC 18: Ink and toners
- Sector of end use:
- SU 0: Other: Manufacture of Ceramics tiles
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 26: Handling of solid inorganic substances at ambient temperature
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 26: Paper and board treatment products
- Sector of end use:
- SU 6b: Manufacture of pulp, paper and paper products
- SU 18: Manufacture of furniture
- SU 0: Other: Packaging, including board
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 7: Industrial spraying
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 14: Metal surface treatment products
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Titanium dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: bulk
- Reference substance:
- Titanium dioxide
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC5: Use at industrial site leading to inclusion into/onto article
- ERC6a: Use of intermediate
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- Process category (PROC):
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 18: Ink and toners
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8b: Widespread use of reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
- Environmental release category (ERC):
- ERC8e: Widespread use of reactive processing aid (no inclusion into or onto article, outdoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
- Environmental release category (ERC):
- ERC9a: Widespread use of functional fluid (indoor)
- Environmental release category (ERC):
- ERC9b: Widespread use of functional fluid (outdoor)
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Environmental release category (ERC):
- ERC12a: Processing of articles at industrial sites with low release
- Environmental release category (ERC):
- ERC12b: Processing of articles at industrial sites with high release
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Process category (PROC):
- PROC 27a: Production of metal powders (hot processes)
- Process category (PROC):
- PROC 27b: Production of metal powders (wet processes)
- Product category used:
- PC 7: Base metals and alloys
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 18: Ink and toners
- PC 19: Intermediate
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 26: Paper and board treatment products
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 2b: Offshore industries
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of paints, coatings, inks, dyes, lubricants, detergents, adhesives and sealants
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Raw material handling of solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Raw material handling of substance in liquid form
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Closed batch process
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Milling
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Mixing or blending in batch processes
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Industrial spraying of substance in liquid form
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Industrial spraying of solid substance
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Extrusion
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Extrusion under semi-closed conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Packaging
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9c: Finger paints
- PC 15: Non-metal-surface treatment products
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 24: Lubricants, greases, release products
- PC 26: Paper and board treatment products
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 16: Use of fuels
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Process category (PROC):
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 20: Use of functional fluids in small devices
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Process category (PROC):
- PROC 27a: Production of metal powders (hot processes)
- Process category (PROC):
- PROC 27b: Production of metal powders (wet processes)
- Product category used:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 4: Anti-freeze and de-icing products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 13: Fuels
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 19: Intermediate
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 40: Extraction agents
- Sector of end use:
- SU 1: Agriculture, forestry and fishing
- SU 2a: Mining (without offshore industries)
- SU 2b: Offshore industries
- SU 4: Manufacture of food products
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Mixing or blending in batch processes
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Handling of liquid substance
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Packaging
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Cleaning and maintenance
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 9b: Fillers, putties, plasters, modelling clay
- Sector of end use:
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 10: Roller application or brushing
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6a: Use of intermediate
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 0: Other: PC 19: intermediate
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Environmental release category
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Process category
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 39: Cosmetics, personal care products
- Sector of end use:
- SU 0: Other: Manufacture of cosmetic products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC5: Use at industrial site leading to inclusion into/onto article
- ERC6a: Use of intermediate
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 18: Ink and toners
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of titanium dioxide as deNOx catalyst
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Raw material handling of solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Raw material handling of substance in liquid form
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Mixing or blending in batch processes
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Handling of paints/coatings
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Sintering
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Titanium Dioxide non-classified
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: bulk
- Reference substance:
- Titanium Dioxide non-classified
- Name:
- Titanium Dioxide - Nanoform Anatase untreated non-classified
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- Titanium Dioxide - Nanoform Anatase untreated non-classified
- Type of information reported:
- single nanoform
- Name of nanoform:
- Titanium Dioxide - Nanoform Anatase untreated non-classified
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Shape category:
- spheroidal
- Percentile:
- D10
- Typical value:
- 2.5 nm
- Range:
- >= 1.5 - <= 3.3 nm
- Percentile:
- D50
- Typical value:
- 3.3 nm
- Range:
- >= 2.3 - <= 4.5 nm
- Percentile:
- D90
- Typical value:
- 4.5 nm
- Range:
- >= 3.6 - <= 5.4 nm
- Fraction of constituent particles in the size range 1-100 nm:
- >= 50 - <= 100 %
- Structure:
- crystalline
- Name:
- anatase
- Pure structure:
- yes
- Typical composition:
- >= 99 %
- Range:
- >= 99 - <= 100 %
- Typical specific surface area:
- ca. 236 m²/g
- Range of specific surface area:
- >= 200 - <= 300 m²/g
- Surface treatment applied:
- no
- Name:
- titanium dioxide-uncoated anatase-nano grade (CG100)
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- titanium dioxide-uncoated anatase-nano grade (CG100)
- Type of information reported:
- single nanoform
- Name of nanoform:
- CG100, PK20
- Name of set of nanoforms:
- Titanium dioxide - Nano Set 7 Anatase uncoated
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 - ca. 100 %
- Shape category:
- spheroidal
- Percentile:
- D10
- Typical value:
- ca. 11.4 nm
- Range:
- >= 10.6 - <= 12.1 nm
- Percentile:
- D50
- Typical value:
- ca. 15.8 nm
- Range:
- >= 15.3 - <= 16.3 nm
- Percentile:
- D90
- Typical value:
- ca. 20.7 nm
- Range:
- >= 19.9 - <= 21.5 nm
- Typical length:
- ca. 21 nm
- Range of length:
- >= 20.4 - <= 21.6 nm
- Typical aspect ratio (:1):
- ca. 1.3 :1
- Range of aspect ratio (:1):
- >= 1.2 - <= 1.4
- Fraction of constituent particles in the size range 1-100 nm:
- ca. 100 - ca. 100 %
- Structure:
- crystalline
- Name:
- anatase
- Pure structure:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 - ca. 100 %
- Crystal system:
- tetragonal
- Bravais lattice:
- body - centred tetragonal
- Typical specific surface area:
- ca. 100 m²/g
- Range of specific surface area:
- > 75 - < 120 m²/g
- Surface treatment applied:
- no
- Does the set contain both treated and non-surface treated nanoforms?:
- no
- Name:
- titanium dioxide-uncoated anatase-nano grade (CG300)
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- titanium dioxide-uncoated anatase-nano grade (CG300)
- Type of information reported:
- single nanoform
- Name of nanoform:
- CG300
- Name of set of nanoforms:
- Titanium dioxide - Nano Set 7 Anatase uncoated
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 - ca. 100 %
- Shape category:
- spheroidal
- Percentile:
- D10
- Typical value:
- ca. 5.1 nm
- Range:
- >= 5 - <= 5.2 nm
- Percentile:
- D50
- Typical value:
- ca. 5.5 nm
- Range:
- >= 5.4 - <= 5.7 nm
- Percentile:
- D90
- Typical value:
- ca. 6.5 nm
- Range:
- >= 6.2 - <= 6.8 nm
- Typical length:
- ca. 6.5 nm
- Range of length:
- >= 6.3 - <= 6.6 nm
- Typical aspect ratio (:1):
- ca. 1.17 :1
- Range of aspect ratio (:1):
- >= 1.1 - <= 1.2
- Fraction of constituent particles in the size range 1-100 nm:
- ca. 100 - ca. 100 %
- Structure:
- crystalline
- Name:
- anatase
- Pure structure:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 - ca. 100 %
- Crystal system:
- tetragonal
- Bravais lattice:
- body - centred tetragonal
- Typical specific surface area:
- ca. 300 m²/g
- Range of specific surface area:
- > 250 - < 350 m²/g
- Surface treatment applied:
- no
- Does the set contain both treated and non-surface treated nanoforms?:
- no
- Name:
- titanium dioxide-uncoated rutile-nano grade (NRK)
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- titanium dioxide-uncoated rutile-nano grade (NRK)
- Type of information reported:
- single nanoform
- Name of nanoform:
- NRK30, NRK40
- Name of set of nanoforms:
- Titanium dioxide - Nano Set 1 Rutile uncoated
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 - ca. 100 %
- Shape category:
- spheroidal
- Percentile:
- D10
- Typical value:
- ca. 23.8 nm
- Range:
- >= 19.9 - <= 27.8 nm
- Percentile:
- D50
- Typical value:
- ca. 32.8 nm
- Range:
- >= 27.3 - <= 38.6 nm
- Percentile:
- D90
- Typical value:
- ca. 42 nm
- Range:
- >= 34.9 - <= 49.4 nm
- Typical length:
- ca. 55 nm
- Range of length:
- >= 41 - <= 73 nm
- Typical aspect ratio (:1):
- ca. 1.7 :1
- Range of aspect ratio (:1):
- >= 1.5 - <= 1.9
- Fraction of constituent particles in the size range 1-100 nm:
- ca. 100 - ca. 100 %
- Structure:
- crystalline
- Name:
- rutile
- Pure structure:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 - ca. 100 %
- Crystal system:
- tetragonal
- Bravais lattice:
- body - centred tetragonal
- Typical specific surface area:
- ca. 35 m²/g
- Range of specific surface area:
- > 25 - < 45 m²/g
- Surface treatment applied:
- no
- Does the set contain both treated and non-surface treated nanoforms?:
- no
- Name of activity / technique:
- Industrial use of titanium dioxide as deNOx catalyst
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Name of activity / technique:
- Handling of the solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of the substance in liquid form
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Mixing
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Flow coating
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Sintering
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Referenceopen allclose all
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses at industrial sites
- Registration/ Notification status for the use:
- use as intermediate registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of titanium dioxide for the production of rubber or plastic articles
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of pellet and/or flakes
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Handling of medium dusty materials (including micronized materials)
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of high dusty materials
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Mixing of the substance in liquid form (closed process)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Mixing of the solid substance
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Quality control of the solid substance
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Quality control of the substance in liquid form
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Further processing
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Calendering
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Spraying application
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Roll and/or spread coating (automated process)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Foaming
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Name of activity / technique:
- Dip coating
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Scrap recycling
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Packaging of massive objects
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- Sector of end use:
- SU 14: Manufacture of basic metals, including alloys
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Titanium Dioxide non-classified
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: bulk
- Reference substance:
- Titanium Dioxide non-classified
- Name:
- titanium dioxide-anatase-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-anatase-pigment grade
- Name:
- titanium dioxide-rutile-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-rutile-pigment grade
- Name:
- titanium dioxide-rutile-pigment grade-stabilization by alumina
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-rutile-pigment grade-stabilization by alumina
- Name:
- Titanium dioxide-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Titanium dioxide-pigment grade
- Name of activity / technique:
- Industrial use of lubricants and detergents
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Name of activity / technique:
- Handling of the substance in solid forms
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of the substance in liquid form
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Mixing (closed process)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Mixing
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Extrusion
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Handling of massive objects
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 24: Lubricants, greases, release products
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Referenceopen allclose all
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of titanium dioxide for the production of rubber or plastic articles
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Name of activity / technique:
- Packaging of massive objects
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Scrap recycling
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Dip coating
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Foaming
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Name of activity / technique:
- Roll and/or spread coating (automated process)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Spraying application
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Calendering
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Further processing
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Quality control of the substance in liquid form
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Quality control of the solid substance
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Mixing of the solid substance
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Mixing of the substance in liquid form (closed process)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Handling of high dusty materials
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of medium dusty materials (including micronized materials)
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of pellet and/or flakes
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Titanium dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: bulk
- Reference substance:
- Titanium dioxide
- Name of activity / technique:
- Industrial use of titanium dioxide for the production of rubber or plastic articles
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Name of activity / technique:
- Handling of pellet and/or flakes
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Production of preparations or articles.
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Calendering
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Packaging of massive objects
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 0: Other: UNC P15500, Catalyst
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC5: Use at industrial site leading to inclusion into/onto article
- ERC6a: Use of intermediate
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 12: Use of blowing agents in manufacture of foam
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 16: Use of fuels
- PROC 17: Lubrication at high energy conditions in metal working operations
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 20: Use of functional fluids in small devices
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 25: Other hot work operations with metals
- PROC 26: Handling of solid inorganic substances at ambient temperature
- PROC 27a: Production of metal powders (hot processes)
- PROC 27b: Production of metal powders (wet processes)
- Product category used:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 4: Anti-freeze and de-icing products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 13: Fuels
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 19: Intermediate
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 40: Extraction agents
- Sector of end use:
- SU 1: Agriculture, forestry and fishing
- SU 2a: Mining (without offshore industries)
- SU 2b: Offshore industries
- SU 4: Manufacture of food products
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8b: Widespread use of reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
- Environmental release category (ERC):
- ERC8e: Widespread use of reactive processing aid (no inclusion into or onto article, outdoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
- Environmental release category (ERC):
- ERC9a: Widespread use of functional fluid (indoor)
- Environmental release category (ERC):
- ERC9b: Widespread use of functional fluid (outdoor)
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC10b: Widespread use of articles with high or intended release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Environmental release category (ERC):
- ERC11b: Widespread use of articles with high or intended release (indoor)
- Environmental release category (ERC):
- ERC12a: Processing of articles at industrial sites with low release
- Environmental release category (ERC):
- ERC12b: Processing of articles at industrial sites with high release
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 16: Use of fuels
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Process category (PROC):
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 20: Use of functional fluids in small devices
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Process category (PROC):
- PROC 27a: Production of metal powders (hot processes)
- Process category (PROC):
- PROC 27b: Production of metal powders (wet processes)
- Product category used:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 4: Anti-freeze and de-icing products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 13: Fuels
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 19: Intermediate
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 40: Extraction agents
- Sector of end use:
- SU 1: Agriculture, forestry and fishing
- SU 2a: Mining (without offshore industries)
- SU 2b: Offshore industries
- SU 4: Manufacture of food products
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8b: Widespread use of reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
- Environmental release category (ERC):
- ERC8e: Widespread use of reactive processing aid (no inclusion into or onto article, outdoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
- Environmental release category (ERC):
- ERC9a: Widespread use of functional fluid (indoor)
- Environmental release category (ERC):
- ERC9b: Widespread use of functional fluid (outdoor)
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC10b: Widespread use of articles with high or intended release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Environmental release category (ERC):
- ERC11b: Widespread use of articles with high or intended release (indoor)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 16: Use of fuels
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Process category (PROC):
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 20: Use of functional fluids in small devices
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Process category (PROC):
- PROC 27a: Production of metal powders (hot processes)
- Process category (PROC):
- PROC 27b: Production of metal powders (wet processes)
- Product category used:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 18: Ink and toners
- PC 19: Intermediate
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 26: Paper and board treatment products
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 39: Cosmetics, personal care products
- Sector of end use:
- SU 1: Agriculture, forestry and fishing
- SU 4: Manufacture of food products
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of fillers, putties, plasters and modelling clay
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Mixing or blending in batch processes
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Handling of liquid substance
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Packaging
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Cleaning and maintenance
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 9b: Fillers, putties, plasters, modelling clay
- Sector of end use:
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for workers
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 39: Cosmetics, personal care products
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use in an adhesive
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- Use in an adhesive
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 7: Industrial spraying
- Product category used:
- PC 23: Leather treatment products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 39: Cosmetics, personal care products
- Sector of end use:
- SU 0: Other: Manufacture of cosmetic products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC6a: Use of intermediate
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Product category used:
- PC 2: Adsorbents
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 0: Other: PC 19: intermediate
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 26: Handling of solid inorganic substances at ambient temperature
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9c: Finger paints
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 24: Lubricants, greases, release products
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC5: Use at industrial site leading to inclusion into/onto article
- ERC6a: Use of intermediate
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 9b: Fillers, putties, plasters, modelling clay
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of titanium dioxide in the paper industry
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of liquid substance
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Mixing or blending in batch processes
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Cleaning and maintenance
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 26: Paper and board treatment products
- Sector of end use:
- SU 6b: Manufacture of pulp, paper and paper products
- SU 18: Manufacture of furniture
- SU 0: Other: Packaging, including board
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Milling, coating, drying, calcination
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- Milling, coating, drying, calcination
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 13: Treatment of articles by dipping and pouring
- PROC 15: Use as laboratory reagent
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category used:
- PC 0: Other: Automotive catalyst
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- industrial use
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- industrial use
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- industrial use
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- industrial use
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- industrial use
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- industrial use
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- industrial use
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- industrial use
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- industrial use
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- industrial use
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- industrial use
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for workers
- Process category (PROC):
- PROC 0: Other: No PROC required in section 3.5, based on REACH Art. 10 a (iii)
- Sector of end use:
- SU 0: Other: No SU required in section 3.5, based on REACH Art. 10 a (iii)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- use at industrial site leading to inclusion into/onto articles
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- manufacture or formulation in closed batch processes with occational controlled exposure
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- mixing and blending in batch processes
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- transfer of substance or mixture at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- transfer of substance or mixture including weighing
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 33: Semiconductors
- PC42: Electrolytes for batteries
- Sector of end use:
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC5: Use at industrial site leading to inclusion into/onto article
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 12: Use of blowing agents in manufacture of foam
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 16: Use of fuels
- PROC 17: Lubrication at high energy conditions in metal working operations
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 20: Use of functional fluids in small devices
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 25: Other hot work operations with metals
- PROC 26: Handling of solid inorganic substances at ambient temperature
- PROC 27a: Production of metal powders (hot processes)
- PROC 27b: Production of metal powders (wet processes)
- Sector of end use:
- SU 0: Other: Use for adhesives, lubrication, soldering, moulding or processing aids in various industry sectors
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of titanium dioxide in 3D-printing
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of non-dusty solids
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Closed batch process
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Extrusion and 3D-printing
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 16: Use of fuels
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Process category (PROC):
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 20: Use of functional fluids in small devices
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Process category (PROC):
- PROC 27a: Production of metal powders (hot processes)
- Process category (PROC):
- PROC 27b: Production of metal powders (wet processes)
- Product category used:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 4: Anti-freeze and de-icing products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 13: Fuels
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 19: Intermediate
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 40: Extraction agents
- Sector of end use:
- SU 0: Other: SU3: Industrial uses: Uses of substances as such or in preparations at industrial sites
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of titanium dioxide-containing paints and coatings
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Name of activity / technique:
- Packaging
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Extrusion under semi-closed conditions
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Extrusion
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Powder spraying/coating operation (highly automated)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 7: Industrial spraying
- Name of activity / technique:
- Spraying of the substance in liquid form
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Mixing and blending
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Milling
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Closed batch process (substance in liquid form)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Closed batch process (substance in solid form)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Handling of the substance in liquid form
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Handling of the solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 18: Ink and toners
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Use in catalysts in refineries
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Catalytic process in the refinery
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Insignificant exposure via the following route:
- oral
- dermal
- eye
- inhalatory
- Insignificant release via the following route:
- water
- air
- soil
- Pattern of exposure:
- accidental / infrequent
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of paints, coatings, inks, dyes, lubricants, detergents, adhesives and sealants
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Cleaning and maintenance
- Process category (PROC):
- PROC 0: Other: Cleaning and maintenance
- Name of activity / technique:
- Packaging
- Process category (PROC):
- PROC 0: Other: Packaging
- Name of activity / technique:
- Sanding
- Process category (PROC):
- PROC 0: Other: Sanding
- Name of activity / technique:
- Extrusion
- Process category (PROC):
- PROC 0: Other: Extrusion
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 0: Other: Industrial spraying
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 0: Other: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 0: Other: Roller application or brushing
- Name of activity / technique:
- Mixing or blending in batch processes
- Process category (PROC):
- PROC 0: Other: Mixing or blending in batch processes
- Name of activity / technique:
- Milling
- Process category (PROC):
- PROC 0: Other: Milling
- Name of activity / technique:
- Handling of liquid substance
- Process category (PROC):
- PROC 0: Other: Handling of liquid substance
- Name of activity / technique:
- Handling of solid substance
- Process category (PROC):
- PROC 0: Other: Handling of solid substance
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9c: Finger paints
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 24: Lubricants, greases, release products
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 11: Manufacture of rubber products
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Anatase
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Anatase
- Name:
- Rutile
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Rutile
- Name:
- Titanium Dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Titanium Dioxide
- Name:
- Titanium Dioxide non-classified
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: bulk
- Reference substance:
- Titanium Dioxide non-classified
- Name:
- Titanium Dioxide - Nanoform Anatase untreated non-classified
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- Titanium Dioxide - Nanoform Anatase untreated non-classified
- Type of information reported:
- single nanoform
- Name of nanoform:
- Titanium Dioxide - Nanoform Anatase untreated non-classified
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Shape category:
- spheroidal
- Percentile:
- D10
- Typical value:
- 2.5 nm
- Range:
- >= 1.5 - <= 3.3 nm
- Percentile:
- D50
- Typical value:
- 3.3 nm
- Range:
- >= 2.3 - <= 4.5 nm
- Percentile:
- D90
- Typical value:
- 4.5 nm
- Range:
- >= 3.6 - <= 5.4 nm
- Fraction of constituent particles in the size range 1-100 nm:
- >= 50 - <= 100 %
- Structure:
- crystalline
- Name:
- anatase
- Pure structure:
- yes
- Typical composition:
- >= 99 %
- Range:
- >= 99 - <= 100 %
- Typical specific surface area:
- ca. 236 m²/g
- Range of specific surface area:
- >= 200 - <= 300 m²/g
- Surface treatment applied:
- no
- Name:
- titanium dioxide-anatase-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-anatase-pigment grade
- Name:
- titanium dioxide-rutile-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-rutile-pigment grade
- Name:
- titanium dioxide-rutile-pigment grade-stabilization by alumina
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-rutile-pigment grade-stabilization by alumina
- Name:
- Titanium dioxide-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Titanium dioxide-pigment grade
- Name:
- titanium dioxide-uncoated anatase-nano grade (CG100)
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- titanium dioxide-uncoated anatase-nano grade (CG100)
- Type of information reported:
- single nanoform
- Name of nanoform:
- CG100, PK20
- Name of set of nanoforms:
- Titanium dioxide - Nano Set 7 Anatase uncoated
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 - ca. 100 %
- Shape category:
- spheroidal
- Percentile:
- D10
- Typical value:
- ca. 11.4 nm
- Range:
- >= 10.6 - <= 12.1 nm
- Percentile:
- D50
- Typical value:
- ca. 15.8 nm
- Range:
- >= 15.3 - <= 16.3 nm
- Percentile:
- D90
- Typical value:
- ca. 20.7 nm
- Range:
- >= 19.9 - <= 21.5 nm
- Typical length:
- ca. 21 nm
- Range of length:
- >= 20.4 - <= 21.6 nm
- Typical aspect ratio (:1):
- ca. 1.3 :1
- Range of aspect ratio (:1):
- >= 1.2 - <= 1.4
- Fraction of constituent particles in the size range 1-100 nm:
- ca. 100 - ca. 100 %
- Structure:
- crystalline
- Name:
- anatase
- Pure structure:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 - ca. 100 %
- Crystal system:
- tetragonal
- Bravais lattice:
- body - centred tetragonal
- Typical specific surface area:
- ca. 100 m²/g
- Range of specific surface area:
- > 75 - < 120 m²/g
- Surface treatment applied:
- no
- Does the set contain both treated and non-surface treated nanoforms?:
- no
- Name:
- titanium dioxide-uncoated anatase-nano grade (CG300)
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- titanium dioxide-uncoated anatase-nano grade (CG300)
- Type of information reported:
- single nanoform
- Name of nanoform:
- CG300
- Name of set of nanoforms:
- Titanium dioxide - Nano Set 7 Anatase uncoated
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 - ca. 100 %
- Shape category:
- spheroidal
- Percentile:
- D10
- Typical value:
- ca. 5.1 nm
- Range:
- >= 5 - <= 5.2 nm
- Percentile:
- D50
- Typical value:
- ca. 5.5 nm
- Range:
- >= 5.4 - <= 5.7 nm
- Percentile:
- D90
- Typical value:
- ca. 6.5 nm
- Range:
- >= 6.2 - <= 6.8 nm
- Typical length:
- ca. 6.5 nm
- Range of length:
- >= 6.3 - <= 6.6 nm
- Typical aspect ratio (:1):
- ca. 1.17 :1
- Range of aspect ratio (:1):
- >= 1.1 - <= 1.2
- Fraction of constituent particles in the size range 1-100 nm:
- ca. 100 - ca. 100 %
- Structure:
- crystalline
- Name:
- anatase
- Pure structure:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 - ca. 100 %
- Crystal system:
- tetragonal
- Bravais lattice:
- body - centred tetragonal
- Typical specific surface area:
- ca. 300 m²/g
- Range of specific surface area:
- > 250 - < 350 m²/g
- Surface treatment applied:
- no
- Does the set contain both treated and non-surface treated nanoforms?:
- no
- Name of activity / technique:
- Industrial use of fillers, putties, plasters and modelling clay
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Name of activity / technique:
- Handling of the solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Semi-closed process
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Handling of the substance in liquid form
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Non-spraying application
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Handling and packaging
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 9b: Fillers, putties, plasters, modelling clay
- Sector of end use:
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Referenceopen allclose all
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Titanium Dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Titanium Dioxide
- Name:
- Rutile
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Rutile
- Name:
- Anatase
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Anatase
- Name of activity / technique:
- Industrial use of titanium dioxide incoil coating
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Name of activity / technique:
- Handling of the solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of the substance in liquid form
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Mixing
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Roller-coating
- Process category (PROC):
- PROC 6: Calendering operations
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Roller-coating in closed systems
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 6: Calendering operations
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Drying and curing under conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Packaging
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- Sector of end use:
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Referenceopen allclose all
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 7: Industrial spraying
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 12: Use of blowing agents in manufacture of foam
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 26: Handling of solid inorganic substances at ambient temperature
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- ERC 5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- PROC 5: Mixing and blending in batch processes
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- PROC 8b: Transfer of substance or preparation (charging/discharging) from /to vessel/large containers at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- PROC 15: Use as laboratory agent
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Name of activity / technique:
- PROC 28: Manual maintenance (cleaning and repair) of machinery
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- Sector of end use:
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of Inks/Ink-/3DP-Components (INDUSTRIAL)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- Use of Inks/Ink-/3DP-Components (INDUSTRIAL)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 15: Non-metal-surface treatment products
- PC 18: Ink and toners
- PC 26: Paper and board treatment products
- PC 32: Polymer preparations and compounds
- PC 35: Washing and cleaning products
- Sector of end use:
- SU 7: Printing and reproduction of recorded media
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Product category used:
- PC 7: Base metals and alloys
- PC 15: Non-metal-surface treatment products
- PC 21: Laboratory chemicals
- PC 33: Semiconductors
- Sector of end use:
- SU 9: Manufacture of fine chemicals
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of liquid substance
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Mixing or blending in batch processes
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Sintering
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Name of activity / technique:
- Cleaning and maintenance
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of titanium dioxide-containing rubber or plastic articles industrial setting
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of liquid substance
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Mixing and blending
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Quality control
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Calendering
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- High energy processes
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Extrusion
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Foaming
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Name of activity / technique:
- Packaging
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Cleaning and maintenance
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8b: Widespread use of reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
- Environmental release category (ERC):
- ERC8e: Widespread use of reactive processing aid (no inclusion into or onto article, outdoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
- Environmental release category (ERC):
- ERC9a: Widespread use of functional fluid (indoor)
- Environmental release category (ERC):
- ERC9b: Widespread use of functional fluid (outdoor)
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC10b: Widespread use of articles with high or intended release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Environmental release category (ERC):
- ERC11b: Widespread use of articles with high or intended release (indoor)
- Environmental release category (ERC):
- ERC12a: Processing of articles at industrial sites with low release
- Environmental release category (ERC):
- ERC12b: Processing of articles at industrial sites with high release
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 16: Use of fuels
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Process category (PROC):
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 20: Use of functional fluids in small devices
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Process category (PROC):
- PROC 27a: Production of metal powders (hot processes)
- Process category (PROC):
- PROC 27b: Production of metal powders (wet processes)
- Product category used:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 4: Anti-freeze and de-icing products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 13: Fuels
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 19: Intermediate
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 40: Extraction agents
- Sector of end use:
- SU 1: Agriculture, forestry and fishing
- SU 2a: Mining (without offshore industries)
- SU 2b: Offshore industries
- SU 4: Manufacture of food products
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Product category used:
- PC 18: Ink and toners
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 0: Other: Catalysts
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 0: Other: Catalyst
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of titanium dioxide in electronics, ceramics and glass
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of liquid substance
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Mixing or blending in batch processes
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Hot temperature process
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Name of activity / technique:
- Grinding
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Packaging
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Cleaning and maintenance
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Sector of end use:
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 18: Ink and toners
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 7: Printing and reproduction of recorded media
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 23: Leather treatment products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of paints, coatings, inks, dyes, lubricants, detergents, adhesives and sealants
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of liquid substance
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Milling
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Mixing or blending in batch processes
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Extrusion
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Sanding
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Packaging
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Cleaning and maintenance
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9c: Finger paints
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 24: Lubricants, greases, release products
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for workers
- Process category (PROC):
- PROC 0: Other: No PROC required in section 3.5, based on REACH Art. 10 a (iii)
- Sector of end use:
- SU 0: Other: No SU required in section 3.5, based on REACH Art. 10 a (iii)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 26: Handling of solid inorganic substances at ambient temperature
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 7: Industrial spraying
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 12: Use of blowing agents in manufacture of foam
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 26: Handling of solid inorganic substances at ambient temperature
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Product category used:
- PC 26: Paper and board treatment products
- Sector of end use:
- SU 6b: Manufacture of pulp, paper and paper products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of titanium dioxide for the production of rubber or plastic articles
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of pellet and/or flakes
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Handling of medium dusty materials (including micronized materials)
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of high dusty materials
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Mixing and blending of substance in liquid form
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Mixing or blending of solid substance
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Quality control of substance in liquid form
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Quality control of solid substance
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Powder spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Extrusion
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Elevated temperature processes
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Foaming
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Name of activity / technique:
- Packaging of massive objects
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 26: Handling of solid inorganic substances at ambient temperature
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Sector of end use:
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC5: Use at industrial site leading to inclusion into/onto article
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 12: Use of blowing agents in manufacture of foam
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 16: Use of fuels
- PROC 17: Lubrication at high energy conditions in metal working operations
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 20: Use of functional fluids in small devices
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 25: Other hot work operations with metals
- PROC 26: Handling of solid inorganic substances at ambient temperature
- PROC 27a: Production of metal powders (hot processes)
- PROC 27b: Production of metal powders (wet processes)
- Sector of end use:
- SU 0: Other: Use for adhesives, lubrication, soldering, moulding or processing aids in various industry sectors
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Name:
- Titanium dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Titanium dioxide
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC5: Use at industrial site leading to inclusion into/onto article
- ERC6a: Use of intermediate
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category used:
- PC 0: Other: Refractory products
- Sector of end use:
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Anatase
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Anatase
- Name:
- Rutile
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Rutile
- Name:
- Titanium Dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Titanium Dioxide
- Name:
- Titanium Dioxide non-classified
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: bulk
- Reference substance:
- Titanium Dioxide non-classified
- Name:
- titanium dioxide-anatase-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-anatase-pigment grade
- Name:
- titanium dioxide-rutile-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-rutile-pigment grade
- Name:
- titanium dioxide-rutile-pigment grade-stabilization by alumina
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-rutile-pigment grade-stabilization by alumina
- Name:
- Titanium dioxide-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Titanium dioxide-pigment grade
- Name of activity / technique:
- Industrial use of titanium dioxide in 3D-printing
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Name of activity / technique:
- Handling of non-dusty solids
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Closed batch process
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Extrusion and 3D-printing
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Cleaning and maintenance of 3D-printing equipment
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Referenceopen allclose all
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 26: Handling of solid inorganic substances at ambient temperature
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC5: Use at industrial site leading to inclusion into/onto article
- ERC6a: Use of intermediate
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 18: Ink and toners
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 0: Other: UNC P15500, Catalyst
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of titanium dioxide-containing paints and coatings
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of the solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of the substance in liquid form
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Closed batch process (substance in solid form)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Closed batch process (substance in liquid form)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Milling
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Mixing and blending
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Spraying of the substance in liquid form
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Powder spraying/coating operation (highly automated)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 7: Industrial spraying
- Name of activity / technique:
- Extrusion
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Extrusion under semi-closed conditions
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Packaging
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 18: Ink and toners
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of titanium dioxide as deNOx catalyst
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of liquid substance
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Mixing or blending in batch processes
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Sintering
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Name of activity / technique:
- Cleaning and maintenance
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of titanium dioxide-containing paints and coatings
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of the solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of the substance in liquid form
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Closed batch process (substance in solid form)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Closed batch process (substance in liquid form)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Milling
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Mixing and blending
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Spraying of the substance in liquid form
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Powder spraying/coating operation (highly automated)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 7: Industrial spraying
- Name of activity / technique:
- Extrusion
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Extrusion under semi-closed conditions
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Packaging
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 18: Ink and toners
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category used:
- PC 18: Ink and toners
- Sector of end use:
- SU 7: Printing and reproduction of recorded media
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Titanium Dioxide non-classified
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: bulk
- Reference substance:
- Titanium Dioxide non-classified
- Name:
- Titanium Dioxide - Nanoform Anatase untreated non-classified
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- Titanium Dioxide - Nanoform Anatase untreated non-classified
- Type of information reported:
- single nanoform
- Name of nanoform:
- Titanium Dioxide - Nanoform Anatase untreated non-classified
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Shape category:
- spheroidal
- Percentile:
- D10
- Typical value:
- 2.5 nm
- Range:
- >= 1.5 - <= 3.3 nm
- Percentile:
- D50
- Typical value:
- 3.3 nm
- Range:
- >= 2.3 - <= 4.5 nm
- Percentile:
- D90
- Typical value:
- 4.5 nm
- Range:
- >= 3.6 - <= 5.4 nm
- Fraction of constituent particles in the size range 1-100 nm:
- >= 50 - <= 100 %
- Structure:
- crystalline
- Name:
- anatase
- Pure structure:
- yes
- Typical composition:
- >= 99 %
- Range:
- >= 99 - <= 100 %
- Typical specific surface area:
- ca. 236 m²/g
- Range of specific surface area:
- >= 200 - <= 300 m²/g
- Surface treatment applied:
- no
- Name:
- titanium dioxide-anatase-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-anatase-pigment grade
- Name:
- titanium dioxide-rutile-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-rutile-pigment grade
- Name:
- titanium dioxide-rutile-pigment grade-stabilization by alumina
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-rutile-pigment grade-stabilization by alumina
- Name:
- Titanium dioxide-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Titanium dioxide-pigment grade
- Name of activity / technique:
- Industrial use of titanium dioxide-containing sealants and adhesives
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Name of activity / technique:
- Handling of the substance in liquid form
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Closed batch process
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Extrusion
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Industrial spraying of the substance in liquid form
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Wet cleaning
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 1: Adhesives, sealants
- Sector of end use:
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 19: Building and construction work
- SU 20: Health services
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Referenceopen allclose all
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 18: Ink and toners
- PC 26: Paper and board treatment products
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- PC 39: Cosmetics, personal care products
- Sector of end use:
- SU 6a: Manufacture of wood and wood products
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of liquid substance
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Milling
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Mixing or blending in batch processes
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Extrusion
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Sanding
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Packaging
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Cleaning and maintenance
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9c: Finger paints
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 24: Lubricants, greases, release products
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 18: Ink and toners
- PC 26: Paper and board treatment products
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- PC 39: Cosmetics, personal care products
- Sector of end use:
- SU 6a: Manufacture of wood and wood products
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8b: Widespread use of reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
- Environmental release category (ERC):
- ERC8e: Widespread use of reactive processing aid (no inclusion into or onto article, outdoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
- Environmental release category (ERC):
- ERC9a: Widespread use of functional fluid (indoor)
- Environmental release category (ERC):
- ERC9b: Widespread use of functional fluid (outdoor)
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC10b: Widespread use of articles with high or intended release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Environmental release category (ERC):
- ERC11b: Widespread use of articles with high or intended release (indoor)
- Environmental release category (ERC):
- ERC12a: Processing of articles at industrial sites with low release
- Environmental release category (ERC):
- ERC12b: Processing of articles at industrial sites with high release
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 16: Use of fuels
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Process category (PROC):
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 20: Use of functional fluids in small devices
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Process category (PROC):
- PROC 27a: Production of metal powders (hot processes)
- Process category (PROC):
- PROC 27b: Production of metal powders (wet processes)
- Product category used:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 4: Anti-freeze and de-icing products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 13: Fuels
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 19: Intermediate
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 40: Extraction agents
- Sector of end use:
- SU 1: Agriculture, forestry and fishing
- SU 2a: Mining (without offshore industries)
- SU 2b: Offshore industries
- SU 4: Manufacture of food products
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of titanium dioxide in electronics and ceramics
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Name of activity / technique:
- Packaging of massive objects
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Hot temperature process
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Name of activity / technique:
- Tabletting, compression, extrusion, pelletisation
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Industrial spraying of the substance in liquid form
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Spraying operation in closed system
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 7: Industrial spraying
- Name of activity / technique:
- Powder spraying operation (fully automated)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 7: Industrial spraying
- Name of activity / technique:
- Mixing of the substance in liquid form
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Mixing of the solid substance
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Handling of the solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Sector of end use:
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of titanium dioxide-containing sealants and adhesives
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of the substance in liquid form
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Closed batch process
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Extrusion
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Treatment of articles by dipping and poring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Industrial spraying of the subtance in liquid form
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Wet clieaning
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 1: Adhesives, sealants
- Sector of end use:
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 19: Building and construction work
- SU 20: Health services
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Intermediate use of titanium dioxide in the manufacture of another substance
- Environmental release category (ERC):
- ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Raw material handling of solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Further processing
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Quality control
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of titanium dioxide in electronics, ceramics and glass
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of liquid substance
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Mixing or blending in batch processes
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Hot temperature process
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Name of activity / technique:
- Grinding
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Packaging
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Cleaning and maintenance
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Sector of end use:
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 6: Calendering operations
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of titanium dioxide in the paper industry
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of liquid substance
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Mixing or blending in batch processes
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Cleaning and maintenance
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 26: Paper and board treatment products
- Sector of end use:
- SU 6b: Manufacture of pulp, paper and paper products
- SU 18: Manufacture of furniture
- SU 0: Other: Packaging, including board
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 18: Ink and toners
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 19: Building and construction work
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for workers
- Process category (PROC):
- PROC 7: Industrial spraying
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- Sector of end use:
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Titanium Dioxide non-classified
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: bulk
- Reference substance:
- Titanium Dioxide non-classified
- Name:
- titanium dioxide-anatase-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-anatase-pigment grade
- Name:
- titanium dioxide-rutile-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-rutile-pigment grade
- Name:
- titanium dioxide-rutile-pigment grade-stabilization by alumina
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-rutile-pigment grade-stabilization by alumina
- Name:
- Titanium dioxide-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Titanium dioxide-pigment grade
- Name of activity / technique:
- Intermediate use of titanium dioxide in the manufacture of another substance
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Name of activity / technique:
- Handling of the solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Further processing
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Quality control
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Referenceopen allclose all
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Product category used:
- PC 7: Base metals and alloys
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 21: Laboratory chemicals
- PC 33: Semiconductors
- Sector of end use:
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Name:
- Titanium dioxide
- Type of composition:
- legal entity composition of the substance
- Reference substance:
- Titanium dioxide
- Name:
- Titanium dioxide - anatase
- Type of composition:
- legal entity composition of the substance
- Reference substance:
- Titanium dioxide - anatase
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 16: Use of fuels
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Process category (PROC):
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 20: Use of functional fluids in small devices
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Process category (PROC):
- PROC 27a: Production of metal powders (hot processes)
- Process category (PROC):
- PROC 27b: Production of metal powders (wet processes)
- Product category used:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 4: Anti-freeze and de-icing products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 13: Fuels
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 19: Intermediate
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 40: Extraction agents
- Sector of end use:
- SU 1: Agriculture, forestry and fishing
- SU 2a: Mining (without offshore industries)
- SU 2b: Offshore industries
- SU 4: Manufacture of food products
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Referenceopen allclose all
Contributing activity / technique for the environmentopen allclose all
Contributing activity / technique for workersopen allclose all
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use at industrial site
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Name of activity / technique:
- Use at industrial site
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 13: Treatment of articles by dipping and pouring
- PROC 15: Use as laboratory reagent
- Sector of end use:
- SU 2b: Offshore industries
- SU 5: Manufacture of textiles, leather, fur
- SU 6b: Manufacture of pulp, paper and paper products
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- SU 24: Scientific research and development
- SU 0: Other: Cleaning activities
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use at industrial sites leading to inclusion into or onto articles
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- High energy process
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Process where opportunity for exposure arises
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Mixing of blending in batch processes
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Calendering operations
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Transfer of substances at non-dedicated facilities
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Name of activity / technique:
- Transfer of substances at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- Transfer of substance into small containers
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Tabletting, compression, extrusion, pelletisation and granulation
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Laboratory analysis
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Low energy manipulation of substances
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 16: Use of fuels
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Process category (PROC):
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 20: Use of functional fluids in small devices
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Process category (PROC):
- PROC 27a: Production of metal powders (hot processes)
- Process category (PROC):
- PROC 27b: Production of metal powders (wet processes)
- Product category used:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 4: Anti-freeze and de-icing products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 13: Fuels
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 40: Extraction agents
- Sector of end use:
- SU 1: Agriculture, forestry and fishing
- SU 2a: Mining (without offshore industries)
- SU 2b: Offshore industries
- SU 4: Manufacture of food products
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 10: Roller application or brushing
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- ERC 5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- PROC 5: Mixing and blending in batch processes
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- PROC 8b: Transfer of substance or preparation (charging/discharging) from /to vessel/large containers at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- PROC 14: Production of preparations or articles by tabletting, compression, extrusion, pelletisation
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- PROC 15: Use as laboratory agent
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- PROC 28: Manual maintenance (cleaning and repair) of machinery
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 0: Other: UCN code P15500 (Catalyst)
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of Inks/Ink-/3DP-Components (INDUSTRIAL)
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- Use of Inks/Ink-/3DP-Components (INDUSTRIAL)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 15: Non-metal-surface treatment products
- PC 18: Ink and toners
- PC 26: Paper and board treatment products
- PC 32: Polymer preparations and compounds
- PC 35: Washing and cleaning products
- Sector of end use:
- SU 7: Printing and reproduction of recorded media
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 16: Use of fuels
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Process category (PROC):
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 20: Use of functional fluids in small devices
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Process category (PROC):
- PROC 27a: Production of metal powders (hot processes)
- Process category (PROC):
- PROC 27b: Production of metal powders (wet processes)
- Product category used:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 4: Anti-freeze and de-icing products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 13: Fuels
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 40: Extraction agents
- Sector of end use:
- SU 1: Agriculture, forestry and fishing
- SU 2a: Mining (without offshore industries)
- SU 2b: Offshore industries
- SU 4: Manufacture of food products
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 18: Ink and toners
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 18: Ink and toners
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 25: Other hot work operations with metals
- Product category used:
- PC 38: Welding and soldering products, flux products
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 26: Handling of solid inorganic substances at ambient temperature
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 0: Other: electroceramics
- Sector of end use:
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 23: Electricity, steam, gas water supply and sewage treatment
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8b: Widespread use of reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
- Environmental release category (ERC):
- ERC8e: Widespread use of reactive processing aid (no inclusion into or onto article, outdoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
- Environmental release category (ERC):
- ERC9a: Widespread use of functional fluid (indoor)
- Environmental release category (ERC):
- ERC9b: Widespread use of functional fluid (outdoor)
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC10b: Widespread use of articles with high or intended release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Environmental release category (ERC):
- ERC11b: Widespread use of articles with high or intended release (indoor)
- Environmental release category (ERC):
- ERC12a: Processing of articles at industrial sites with low release
- Environmental release category (ERC):
- ERC12b: Processing of articles at industrial sites with high release
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 16: Use of fuels
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Process category (PROC):
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 20: Use of functional fluids in small devices
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Process category (PROC):
- PROC 27a: Production of metal powders (hot processes)
- Process category (PROC):
- PROC 27b: Production of metal powders (wet processes)
- Product category used:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 4: Anti-freeze and de-icing products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 13: Fuels
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 19: Intermediate
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 40: Extraction agents
- Sector of end use:
- SU 1: Agriculture, forestry and fishing
- SU 2a: Mining (without offshore industries)
- SU 2b: Offshore industries
- SU 4: Manufacture of food products
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- ERC 5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- PROC 5: Mixing and blending in batch processes
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- PROC 8b: Transfer of substance or preparation (charging/discharging) from /to vessel/large containers at dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Name of activity / technique:
- PROC 15: Use as laboratory agent
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- PROC 28: Manual maintenance (cleaning and repair) of machinery
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 18: Ink and toners
- Sector of end use:
- SU 7: Printing and reproduction of recorded media
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in an own CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of titanium dioxide in coil coating
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Raw material handling of solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Raw material handling of substance in liquid form
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Mixing or blending in batch processes
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Roller-coating
- Process category (PROC):
- PROC 6: Calendering operations
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Roller-coating in closed systems
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 6: Calendering operations
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Drying and curing
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Name of activity / technique:
- Packaging
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- Sector of end use:
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of liquid substance
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Mixing and blending
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Quality control
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Calendering
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- High energy processes
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Extrusion
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Foaming
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Name of activity / technique:
- Packaging
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Cleaning and maintenance
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- Sector of end use:
- SU 9: Manufacture of fine chemicals
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Insignificant exposure via the following route:
- oral
- dermal
- eye
- inhalatory
- Insignificant release via the following route:
- water
- air
- soil
- waste
- Pattern of exposure:
- accidental / infrequent
Reference
Contributing activity / technique for the environmentopen allclose all
Contributing activity / technique for workersopen allclose all
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC5: Use at industrial site leading to inclusion into/onto article
- ERC6a: Use of intermediate
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Product category used:
- PC 38: Welding and soldering products, flux products
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of paints, coatings, inks, dyes, lubricants, detergents, adhesives and sealants
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of liquid substance
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Milling
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Mixing or blending in batch processes
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Extrusion
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Sanding
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Packaging
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Cleaning and maintenance
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9c: Finger paints
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 24: Lubricants, greases, release products
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 25: Other hot work operations with metals
- Product category used:
- PC 7: Base metals and alloys
- PC 38: Welding and soldering products, flux products
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 19: Intermediate
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- in a mixture
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 7: Industrial spraying
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 7: Base metals and alloys
- PC 15: Non-metal-surface treatment products
- PC 21: Laboratory chemicals
- PC 33: Semiconductors
- Sector of end use:
- SU 9: Manufacture of fine chemicals
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC1: Manufacture of the substance
- Environmental release category (ERC):
- ERC2: Formulation into mixture
- Environmental release category (ERC):
- ERC3: Formulation into solid matrix
- Environmental release category (ERC):
- ERC8a: Widespread use of non-reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8b: Widespread use of reactive processing aid (no inclusion into or onto article, indoor)
- Environmental release category (ERC):
- ERC8c: Widespread use leading to inclusion into/onto article (indoor)
- Environmental release category (ERC):
- ERC8d: Widespread use of non-reactive processing aid (no inclusion into or onto article, outdoor)
- Environmental release category (ERC):
- ERC8e: Widespread use of reactive processing aid (no inclusion into or onto article, outdoor)
- Environmental release category (ERC):
- ERC8f: Widespread use leading to inclusion into/onto article (outdoor)
- Environmental release category (ERC):
- ERC9a: Widespread use of functional fluid (indoor)
- Environmental release category (ERC):
- ERC9b: Widespread use of functional fluid (outdoor)
- Environmental release category (ERC):
- ERC10a: Widespread use of articles with low release (outdoor)
- Environmental release category (ERC):
- ERC10b: Widespread use of articles with high or intended release (outdoor)
- Environmental release category (ERC):
- ERC11a: Widespread use of articles with low release (indoor)
- Environmental release category (ERC):
- ERC11b: Widespread use of articles with high or intended release (indoor)
- Environmental release category (ERC):
- ERC12a: Processing of articles at industrial sites with low release
- Environmental release category (ERC):
- ERC12b: Processing of articles at industrial sites with high release
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 16: Use of fuels
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Process category (PROC):
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 20: Use of functional fluids in small devices
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Process category (PROC):
- PROC 27a: Production of metal powders (hot processes)
- Process category (PROC):
- PROC 27b: Production of metal powders (wet processes)
- Product category used:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 4: Anti-freeze and de-icing products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 13: Fuels
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 19: Intermediate
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 40: Extraction agents
- Sector of end use:
- SU 1: Agriculture, forestry and fishing
- SU 2a: Mining (without offshore industries)
- SU 2b: Offshore industries
- SU 4: Manufacture of food products
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 0: Other: UCN code P15500
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Regulatory status:
- use in Scientific Research and Development
- use in cosmetics products
- use in food contact materials
- Name:
- Titanium Dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Titanium Dioxide
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC5: Use at industrial site leading to inclusion into/onto article
- ERC6a: Use of intermediate
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- ERC7: Use of functional fluid at industrial site
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 12: Use of blowing agents in manufacture of foam
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 16: Use of fuels
- PROC 17: Lubrication at high energy conditions in metal working operations
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 20: Use of functional fluids in small devices
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 25: Other hot work operations with metals
- PROC 26: Handling of solid inorganic substances at ambient temperature
- PROC 27a: Production of metal powders (hot processes)
- PROC 27b: Production of metal powders (wet processes)
- Product category used:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 4: Anti-freeze and de-icing products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 13: Fuels
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 40: Extraction agents
- Sector of end use:
- SU 1: Agriculture, forestry and fishing
- SU 2a: Mining (without offshore industries)
- SU 2b: Offshore industries
- SU 4: Manufacture of food products
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Titanium dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Titanium dioxide
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Process category (PROC):
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 15: Use as laboratory reagent
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Subsequent service life relevant for this use:
- no
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Pigment production
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- Pigment production
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 35: Washing and cleaning products
- PC 39: Cosmetics, personal care products
- PC 0: Other: PC 6: Automotive Care Products
- Sector of end use:
- SU 2b: Offshore industries
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Rutile
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Rutile
- Name:
- Anatase
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Anatase
- Name:
- Titanium Dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Titanium Dioxide
- Name of activity / technique:
- - Use of titanium dioxide as deNOx catalyst
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Name of activity / technique:
- Handling of the solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of the substance inliquid form
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Mixing
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Flow coating
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and poruing
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Sintering
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Referenceopen allclose all
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 16: Use of fuels
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Process category (PROC):
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 20: Use of functional fluids in small devices
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Process category (PROC):
- PROC 27a: Production of metal powders (hot processes)
- Process category (PROC):
- PROC 27b: Production of metal powders (wet processes)
- Product category used:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 4: Anti-freeze and de-icing products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 13: Fuels
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 19: Intermediate
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 40: Extraction agents
- Sector of end use:
- SU 1: Agriculture, forestry and fishing
- SU 2a: Mining (without offshore industries)
- SU 2b: Offshore industries
- SU 4: Manufacture of food products
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- Environmental release category (ERC):
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Process category (PROC):
- PROC 11: Non industrial spraying
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 16: Use of fuels
- Process category (PROC):
- PROC 17: Lubrication at high energy conditions in metal working operations
- Process category (PROC):
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 20: Use of functional fluids in small devices
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Process category (PROC):
- PROC 27a: Production of metal powders (hot processes)
- Process category (PROC):
- PROC 27b: Production of metal powders (wet processes)
- Product category used:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 4: Anti-freeze and de-icing products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 13: Fuels
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 19: Intermediate
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 40: Extraction agents
- Sector of end use:
- SU 1: Agriculture, forestry and fishing
- SU 2a: Mining (without offshore industries)
- SU 2b: Offshore industries
- SU 4: Manufacture of food products
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of fillers, putties, plasters and modelling clay
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Name of activity / technique:
- Handling and packaging
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Non-spraying application
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Handling of the substance in liquid form
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Semi-closed process
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Handling of the solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category used:
- PC 9b: Fillers, putties, plasters, modelling clay
- Sector of end use:
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of titanium dioxide in electronics, ceramics, glass and frits
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Raw material handling of solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Mixing or blending of solid substance
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Mixing or blending of substance in liquid form
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Powder spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Spraying operation in closed system
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 7: Industrial spraying
- Name of activity / technique:
- Industrial spraying of substance in liquid form
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Tabletting, compression, extrusion, pelletisation
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Hot temperature process
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Name of activity / technique:
- Packaging of massive objects
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Sector of end use:
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC5: Use at industrial site leading to inclusion into/onto article
- ERC6a: Use of intermediate
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 18: Ink and toners
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 26: Handling of solid inorganic substances at ambient temperature
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 0: Other:
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of paints, coatings, inks, dyes, lubricants, detergents, adhesives and sealants
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Raw material handling of solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Raw material handling of substance in liquid form
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Milling
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Mixing or blending in batch processes
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Industrial spraying of substance in liquid form
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Industrial spraying of solid substance
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Extrusion
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Extrusion under semi-closed conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Packaging
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9c: Finger paints
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 24: Lubricants, greases, release products
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category used:
- PC 1: Adhesives, sealants
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9c: Finger paints
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 24: Lubricants, greases, release products
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC5: Use at industrial site leading to inclusion into/onto article
- ERC6a: Use of intermediate
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 12: Use of blowing agents in manufacture of foam
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 16: Use of fuels
- PROC 17: Lubrication at high energy conditions in metal working operations
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 20: Use of functional fluids in small devices
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 25: Other hot work operations with metals
- PROC 26: Handling of solid inorganic substances at ambient temperature
- PROC 27a: Production of metal powders (hot processes)
- PROC 27b: Production of metal powders (wet processes)
- PROC 0: Other: Use for adhesives, lubrication, soldering, moulding or processing aids in various industry sectors
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC6a: Use of intermediate
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Product category used:
- PC 2: Adsorbents
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use as intermediate registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of titanium dioxide in polymerisation processes for textile grades
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of the solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Mixing
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Handling of the substance in liquid form
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Polymerisation and further processing
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 10: Roller application or brushing
- Product category used:
- PC 23: Leather treatment products
- PC 26: Paper and board treatment products
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Arc welding
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Name of activity / technique:
- Arc welding
- Process category (PROC):
- PROC 25: Other hot work operations with metals
- Product category used:
- PC 38: Welding and soldering products, flux products
- Sector of end use:
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of liquid substance
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Mixing or blending in batch processes
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Cleaning and maintenance
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 26: Paper and board treatment products
- Sector of end use:
- SU 6b: Manufacture of pulp, paper and paper products
- SU 18: Manufacture of furniture
- SU 0: Other: Packaging, including board
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Anatase
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Anatase
- Name:
- Rutile
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Rutile
- Name:
- Titanium Dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Titanium Dioxide
- Name of activity / technique:
- Industrial use of lubricants and detergents
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Name of activity / technique:
- Handling of the substance in solid forms
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of the substance in liquid form
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Mixing (closed process)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Mixing
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Extrusion
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Handling of massive objects
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 24: Lubricants, greases, release products
- PC 35: Washing and cleaning products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Referenceopen allclose all
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- Product category used:
- PC 23: Leather treatment products
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 7: Industrial spraying
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 25: Other hot work operations with metals
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 9b: Fillers, putties, plasters, modelling clay
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- Substance supplied to that use in form of:
- as such
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Use of titanium dioxide in the paper industry
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of solid substance
- Process category (PROC):
- PROC 0: Other: Handling of solid substance
- Name of activity / technique:
- Handling of liquid substance
- Process category (PROC):
- PROC 0: Other: Handling of liquid substance
- Name of activity / technique:
- Mixing or blending in batch processes
- Process category (PROC):
- PROC 0: Other: Mixing or blending in batch processes
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 0: Other: Industrial spraying
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 0: Other: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 0: Other: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Cleaning and maintenance
- Process category (PROC):
- PROC 0: Other: Cleaning and maintenance
- Product category used:
- PC 26: Paper and board treatment products
- Sector of end use:
- SU 6b: Manufacture of pulp, paper and paper products
- SU 18: Manufacture of furniture
- SU 0: Other: Packaging, including board
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Titanium Dioxide non-classified
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: bulk
- Reference substance:
- Titanium Dioxide non-classified
- Name:
- titanium dioxide-anatase-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-anatase-pigment grade
- Name:
- titanium dioxide-rutile-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-rutile-pigment grade
- Name:
- titanium dioxide-rutile-pigment grade-stabilization by alumina
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-rutile-pigment grade-stabilization by alumina
- Name:
- Titanium dioxide-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Titanium dioxide-pigment grade
- Name of activity / technique:
- Industrial use of titanium dioxide in coil coating
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Name of activity / technique:
- Handling of the solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of the substance in liquid form
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Mixing
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Roller-coating
- Process category (PROC):
- PROC 6: Calendering operations
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Roller-coating in closed systems
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 6: Calendering operations
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Drying and curing under closed conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Packaging
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- Sector of end use:
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Referenceopen allclose all
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 18: Ink and toners
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category used:
- PC 33: Semiconductors
- Sector of end use:
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Titanium dioxide used by workers in industrial settings
- Environmental release category (ERC):
- ERC6a: Use of intermediate
Contributing activity / technique for workers
- Name of activity / technique:
- Titanium dioxide used by workers in industrial settings
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 0: Other: PC 19: Intermediate
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC5: Use at industrial site leading to inclusion into/onto article
- ERC6a: Use of intermediate
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 12: Use of blowing agents in manufacture of foam
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 16: Use of fuels
- PROC 17: Lubrication at high energy conditions in metal working operations
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 20: Use of functional fluids in small devices
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 25: Other hot work operations with metals
- PROC 26: Handling of solid inorganic substances at ambient temperature
- PROC 27a: Production of metal powders (hot processes)
- PROC 27b: Production of metal powders (wet processes)
- Product category used:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 4: Anti-freeze and de-icing products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 13: Fuels
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 40: Extraction agents
- Sector of end use:
- SU 1: Agriculture, forestry and fishing
- SU 2a: Mining (without offshore industries)
- SU 2b: Offshore industries
- SU 4: Manufacture of food products
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC6a: Use of intermediate
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Product category used:
- PC 0: Other: PC 19: intermediate
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC5: Use at industrial site leading to inclusion into/onto article
- ERC6a: Use of intermediate
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
- ERC6c: Use of monomer in polymerisation processes at industrial site (inclusion or not into/onto article)
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
- ERC7: Use of functional fluid at industrial site
Contributing activity / technique for workers
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 11: Non industrial spraying
- PROC 12: Use of blowing agents in manufacture of foam
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 15: Use as laboratory reagent
- PROC 16: Use of fuels
- PROC 17: Lubrication at high energy conditions in metal working operations
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 20: Use of functional fluids in small devices
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- PROC 25: Other hot work operations with metals
- PROC 26: Handling of solid inorganic substances at ambient temperature
- PROC 27a: Production of metal powders (hot processes)
- PROC 27b: Production of metal powders (wet processes)
- Product category used:
- PC 1: Adhesives, sealants
- PC 2: Adsorbents
- PC 3: Air care products
- PC 4: Anti-freeze and de-icing products
- PC 7: Base metals and alloys
- PC 8: Biocidal products (e.g. disinfectants, pest control)
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 11: Explosives
- PC 12: Fertilisers
- PC 13: Fuels
- PC 14: Metal surface treatment products
- PC 15: Non-metal-surface treatment products
- PC 16: Heat transfer fluids
- PC 17: Hydraulic fluids
- PC 18: Ink and toners
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 21: Laboratory chemicals
- PC 23: Leather treatment products
- PC 24: Lubricants, greases, release products
- PC 25: Metal working fluids
- PC 26: Paper and board treatment products
- PC 27: Plant protection products
- PC 28: Perfumes, fragrances
- PC 29: Pharmaceuticals
- PC 30: Photo-chemicals
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 33: Semiconductors
- PC 34: Textile dyes, and impregnating products
- PC 35: Washing and cleaning products
- PC 36: Water softeners
- PC 37: Water treatment chemicals
- PC 38: Welding and soldering products, flux products
- PC 39: Cosmetics, personal care products
- PC 40: Extraction agents
- Sector of end use:
- SU 1: Agriculture, forestry and fishing
- SU 2a: Mining (without offshore industries)
- SU 2b: Offshore industries
- SU 4: Manufacture of food products
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 14: Manufacture of basic metals, including alloys
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Rutile
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Rutile
- Name:
- Titanium Dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Titanium Dioxide
- Name:
- Anatase
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Anatase
- Name:
- Titanium Dioxide non-classified
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: bulk
- Reference substance:
- Titanium Dioxide non-classified
- Name:
- Titanium Dioxide - Nanoform Anatase untreated non-classified
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- Titanium Dioxide - Nanoform Anatase untreated non-classified
- Type of information reported:
- single nanoform
- Name of nanoform:
- Titanium Dioxide - Nanoform Anatase untreated non-classified
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Shape category:
- spheroidal
- Percentile:
- D10
- Typical value:
- 2.5 nm
- Range:
- >= 1.5 - <= 3.3 nm
- Percentile:
- D50
- Typical value:
- 3.3 nm
- Range:
- >= 2.3 - <= 4.5 nm
- Percentile:
- D90
- Typical value:
- 4.5 nm
- Range:
- >= 3.6 - <= 5.4 nm
- Fraction of constituent particles in the size range 1-100 nm:
- >= 50 - <= 100 %
- Structure:
- crystalline
- Name:
- anatase
- Pure structure:
- yes
- Typical composition:
- >= 99 %
- Range:
- >= 99 - <= 100 %
- Typical specific surface area:
- ca. 236 m²/g
- Range of specific surface area:
- >= 200 - <= 300 m²/g
- Surface treatment applied:
- no
- Name:
- titanium dioxide-anatase-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-anatase-pigment grade
- Name:
- titanium dioxide-rutile-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-rutile-pigment grade
- Name:
- titanium dioxide-rutile-pigment grade-stabilization by alumina
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-rutile-pigment grade-stabilization by alumina
- Name:
- Titanium dioxide-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Titanium dioxide-pigment grade
- Name:
- titanium dioxide-uncoated anatase-nano grade (CG100)
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- titanium dioxide-uncoated anatase-nano grade (CG100)
- Type of information reported:
- single nanoform
- Name of nanoform:
- CG100, PK20
- Name of set of nanoforms:
- Titanium dioxide - Nano Set 7 Anatase uncoated
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 - ca. 100 %
- Shape category:
- spheroidal
- Percentile:
- D10
- Typical value:
- ca. 11.4 nm
- Range:
- >= 10.6 - <= 12.1 nm
- Percentile:
- D50
- Typical value:
- ca. 15.8 nm
- Range:
- >= 15.3 - <= 16.3 nm
- Percentile:
- D90
- Typical value:
- ca. 20.7 nm
- Range:
- >= 19.9 - <= 21.5 nm
- Typical length:
- ca. 21 nm
- Range of length:
- >= 20.4 - <= 21.6 nm
- Typical aspect ratio (:1):
- ca. 1.3 :1
- Range of aspect ratio (:1):
- >= 1.2 - <= 1.4
- Fraction of constituent particles in the size range 1-100 nm:
- ca. 100 - ca. 100 %
- Structure:
- crystalline
- Name:
- anatase
- Pure structure:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 - ca. 100 %
- Crystal system:
- tetragonal
- Bravais lattice:
- body - centred tetragonal
- Typical specific surface area:
- ca. 100 m²/g
- Range of specific surface area:
- > 75 - < 120 m²/g
- Surface treatment applied:
- no
- Does the set contain both treated and non-surface treated nanoforms?:
- no
- Name:
- titanium dioxide-uncoated anatase-nano grade (CG300)
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: nanoform
- Reference substance:
- titanium dioxide-uncoated anatase-nano grade (CG300)
- Type of information reported:
- single nanoform
- Name of nanoform:
- CG300
- Name of set of nanoforms:
- Titanium dioxide - Nano Set 7 Anatase uncoated
- Shape category:
- spheroidal
- Shape:
- spherical
- Pure shape:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 - ca. 100 %
- Shape category:
- spheroidal
- Percentile:
- D10
- Typical value:
- ca. 5.1 nm
- Range:
- >= 5 - <= 5.2 nm
- Percentile:
- D50
- Typical value:
- ca. 5.5 nm
- Range:
- >= 5.4 - <= 5.7 nm
- Percentile:
- D90
- Typical value:
- ca. 6.5 nm
- Range:
- >= 6.2 - <= 6.8 nm
- Typical length:
- ca. 6.5 nm
- Range of length:
- >= 6.3 - <= 6.6 nm
- Typical aspect ratio (:1):
- ca. 1.17 :1
- Range of aspect ratio (:1):
- >= 1.1 - <= 1.2
- Fraction of constituent particles in the size range 1-100 nm:
- ca. 100 - ca. 100 %
- Structure:
- crystalline
- Name:
- anatase
- Pure structure:
- yes
- Typical composition:
- ca. 100 %
- Range:
- ca. 100 - ca. 100 %
- Crystal system:
- tetragonal
- Bravais lattice:
- body - centred tetragonal
- Typical specific surface area:
- ca. 300 m²/g
- Range of specific surface area:
- > 250 - < 350 m²/g
- Surface treatment applied:
- no
- Does the set contain both treated and non-surface treated nanoforms?:
- no
- Name of activity / technique:
- Industrial use of titanium dioxide-containing paints and coatings
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Name of activity / technique:
- Handling of the solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of the substance in liquid form
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Closed batch process (substance in solid form)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Closed batch process (substance in liquid form)
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Milling
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Mixing and blending
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Spraying of the substance in liquid form
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Powder spraying/coating operation (highly automated)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 7: Industrial spraying
- Name of activity / technique:
- Extrusion
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Extrusion under semi-closed conditions
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Packaging
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 18: Ink and toners
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6a: Manufacture of wood and wood products
- SU 6b: Manufacture of pulp, paper and paper products
- SU 7: Printing and reproduction of recorded media
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 15: Manufacture of fabricated metal products, except machinery and equipment
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Referenceopen allclose all
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Product category used:
- PC 27: Plant protection products
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 9: Manufacture of fine chemicals
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Environmental release category (ERC):
- ERC6b: Use of reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Product category used:
- PC 2: Adsorbents
- PC 19: Intermediate
- PC 20: Products such as ph-regulators, flocculants, precipitants, neutralisation agents
- PC 0: Other: Catalysts
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Titanium dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Titanium dioxide
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 15: Use as laboratory reagent
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Subsequent service life relevant for this use:
- yes
Reference
Contributing activity / technique for the environment
Contributing activity / technique for workers
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Anatase
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Anatase
- Name:
- Titanium Dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Titanium Dioxide
- Name:
- Rutile
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Rutile
- Name of activity / technique:
- Intermediate use ofe titanium dioxide in the manufacture or another substance
- Environmental release category (ERC):
- ERC6a: Use of intermediate
- Name of activity / technique:
- Handling of the solid subtsance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Further processing
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Quality control
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Sector of end use:
- SU 8: Manufacture of bulk, large scale chemicals (including petroleum products)
- SU 9: Manufacture of fine chemicals
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
Referenceopen allclose all
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses at industrial sites
Contributing activity / technique for the environment
- Name of activity / technique:
- Production of erasers
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Process category (PROC):
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 9c: Finger paints
- PC 18: Ink and toners
- PC 26: Paper and board treatment products
- PC 31: Polishes and wax blends
- PC 32: Polymer preparations and compounds
- PC 34: Textile dyes, and impregnating products
- PC 39: Cosmetics, personal care products
- Sector of end use:
- SU 6a: Manufacture of wood and wood products
- SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 24: Scientific research and development
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Titanium Dioxide non-classified
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: bulk
- Reference substance:
- Titanium Dioxide non-classified
- Name:
- titanium dioxide-anatase-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-anatase-pigment grade
- Name:
- titanium dioxide-rutile-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-rutile-pigment grade
- Name:
- titanium dioxide-rutile-pigment grade-stabilization by alumina
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-rutile-pigment grade-stabilization by alumina
- Name:
- Titanium dioxide-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Titanium dioxide-pigment grade
- Name of activity / technique:
- Industrial use of titanium dioxide in electronics and ceramics
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Name of activity / technique:
- Handling of the solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Mixing of the solid substance
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Mixing of the substance in liquid form
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Powder spraying operation (fully automated)
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- PROC 7: Industrial spraying
- Name of activity / technique:
- Spraying operation in closed system
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 7: Industrial spraying
- Name of activity / technique:
- Industrial spraying of the substance in liquid form
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Tabletting, compression, extrusion, pelletisation
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Hot temperature process
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Name of activity / technique:
- Packaging of massive objects
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Sector of end use:
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Referenceopen allclose all
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 6: Calendering operations
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 20: Health services
- SU 23: Electricity, steam, gas water supply and sewage treatment
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Product category used:
- PC 14: Metal surface treatment products
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 6: Calendering operations
- Product category used:
- PC 23: Leather treatment products
- PC 26: Paper and board treatment products
- PC 34: Textile dyes, and impregnating products
- Sector of end use:
- SU 5: Manufacture of textiles, leather, fur
- SU 6b: Manufacture of pulp, paper and paper products
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environmentopen allclose all
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Environmental release category (ERC):
- ERC6d: Use of reactive process regulators in polymerisation processes at industrial site (inclusion or not into/onto article)
Contributing activity / technique for workersopen allclose all
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Process category (PROC):
- PROC 7: Industrial spraying
- Process category (PROC):
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- PC 9b: Fillers, putties, plasters, modelling clay
- PC 18: Ink and toners
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 16: Manufacture of computer, electronic and optical products, electrical equipment
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of fillers, putties, plasters and modelling clay
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Raw material handling of solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Chemical production where opportunity for exposure arises
- Process category (PROC):
- PROC 4: Chemical production where opportunity for exposure arises
- Name of activity / technique:
- Handling of substance in liquid form
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Packaging
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 9b: Fillers, putties, plasters, modelling clay
- Sector of end use:
- SU 13: Manufacture of other non-metallic mineral products, e.g. plasters, cement
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
Contributing activity / technique for workers
- Process category (PROC):
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 11: Non industrial spraying
- PROC 13: Treatment of articles by dipping and pouring
- PROC 15: Use as laboratory reagent
- PROC 18: General greasing / lubrication at high kinetic energy conditions
- PROC 19: Hand-mixing with intimate contact and only PPE available.
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 23: Open processing and transfer operations with minerals/metals at elevated temperature
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Industrial use of titanium dioxide as deNOx catalyst
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of the solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of the substance in liquid form
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- Name of activity / technique:
- Mixing
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Industrial spraying
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Flow coating
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Roller application or brushing
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Treatment of articles by dipping and pouring
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Sintering
- Process category (PROC):
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 6: Calendering operations
- PROC 7: Industrial spraying
- PROC 8a: Transfer of substance or mixture (charging and discharging) at non-dedicated facilities
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 10: Roller application or brushing
- PROC 13: Treatment of articles by dipping and pouring
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Sector of end use:
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 0: Other: SU 10: Formulation [mixing] of preparations and/or re-packaging (excluding alloys)
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported <10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- PROC 7: Industrial spraying
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Product category used:
- PC 9a: Coatings and paints, thinners, paint removes
- Sector of end use:
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
- Name:
- Titanium Dioxide
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Titanium Dioxide
- Name:
- Rutile
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Rutile
- Name:
- Anatase
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Anatase
- Name:
- Titanium Dioxide non-classified
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: bulk
- Reference substance:
- Titanium Dioxide non-classified
- Name:
- titanium dioxide-anatase-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-anatase-pigment grade
- Name:
- titanium dioxide-rutile-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-rutile-pigment grade
- Name:
- titanium dioxide-rutile-pigment grade-stabilization by alumina
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- titanium dioxide-rutile-pigment grade-stabilization by alumina
- Name:
- Titanium dioxide-pigment grade
- Type of composition:
- legal entity composition of the substance
- State / form:
- solid: particulate/powder
- Reference substance:
- Titanium dioxide-pigment grade
- Name of activity / technique:
- Industrial use of titanium dioxide for the production of rubber or plastic articles
- Environmental release category (ERC):
- ERC5: Use at industrial site leading to inclusion into/onto article
- Name of activity / technique:
- Handling of pellet and/or flakes
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Handling of medium dusty materials (including micronized materials)
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Handling of high dusty materials
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Mixing of the substance in liquid form (closed process)
- Process category (PROC):
- PROC 1: Chemical production or refinery in closed process without likelihood of exposure or processes with equivalent containment conditions
- PROC 2: Chemical production or refinery in closed continuous process with occasional controlled exposure or processes with equivalent containment conditions
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Name of activity / technique:
- Mixing of the solid substance
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Quality control of the solid substance
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Quality control of the substance in liquid form
- Process category (PROC):
- PROC 15: Use as laboratory reagent
- Name of activity / technique:
- Further processing
- Process category (PROC):
- PROC 14: Tabletting, compression, extrusion, pelletisation, granulation
- Name of activity / technique:
- Calendering
- Process category (PROC):
- PROC 6: Calendering operations
- Name of activity / technique:
- Spraying application
- Process category (PROC):
- PROC 7: Industrial spraying
- Name of activity / technique:
- Roll and/or spread coating (automated process)
- Process category (PROC):
- PROC 10: Roller application or brushing
- Name of activity / technique:
- Foaming
- Process category (PROC):
- PROC 12: Use of blowing agents in manufacture of foam
- Name of activity / technique:
- Dip coating
- Process category (PROC):
- PROC 13: Treatment of articles by dipping and pouring
- Name of activity / technique:
- Scrap recycling
- Process category (PROC):
- PROC 24: High (mechanical) energy work-up of substances bound in materials and/or articles
- Name of activity / technique:
- Packaging of massive objects
- Process category (PROC):
- PROC 21: Low energy manipulation of substances bound in materials and/or articles
- Name of activity / technique:
- Removal of dust
- Process category (PROC):
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 32: Polymer preparations and compounds
- Sector of end use:
- SU 11: Manufacture of rubber products
- SU 12: Manufacture of plastics products, including compounding and conversion
- SU 17: General manufacturing, e.g. machinery, equipment, vehicles, other transport equipment
- SU 18: Manufacture of furniture
- SU 19: Building and construction work
- Substance supplied to that use in form of:
- as such
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR
Referenceopen allclose all
Contributing activity / technique for the environment
Contributing activity / technique for workersopen allclose all
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Name of activity / technique:
- Intermediate use of titanium dioxide in the manufacture of frits and glass
- Environmental release category (ERC):
- ERC6a: Use of intermediate
Contributing activity / technique for workersopen allclose all
- Name of activity / technique:
- Handling of the solid substance
- Process category (PROC):
- PROC 26: Handling of solid inorganic substances at ambient temperature
- Name of activity / technique:
- Mixing of the solid substance
- Process category (PROC):
- PROC 5: Mixing or blending in batch processes
- Name of activity / technique:
- Hot temperature process
- Process category (PROC):
- PROC 22: Potentially closed processing operations with minerals/metals at elevated temperature. Industrial setting
- Process category (PROC):
- PROC 3: Manufacture or formulation in the chemical industry in closed batch processes with occasional controlled exposure or processes with equivalent containment conditions
- Sector of end use:
- SU 0: Other: Manufacture of coatings for glass, enamels
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- no
- Related assessment:
- use assessed in a joint CSR
Uses at industrial sites
- Registration/ Notification status for the use:
- use registered according to REACH Article 10; total tonnage manufactured/imported >=10tonnes/year per registrant
Contributing activity / technique for the environment
- Environmental release category (ERC):
- ERC4: Use of non-reactive processing aid at industrial site (no inclusion into or onto article)
- ERC5: Use at industrial site leading to inclusion into/onto article
Contributing activity / technique for workers
- Process category (PROC):
- PROC 8b: Transfer of substance or mixture (charging and discharging) at dedicated facilities
- PROC 9: Transfer of substance or mixture into small containers (dedicated filling line, including weighing)
- PROC28: Manual maintenance (cleaning and repair) of machinery
- Product category used:
- PC 35: Washing and cleaning products
- PC 38: Welding and soldering products, flux products
- Sector of end use:
- SU 7: Printing and reproduction of recorded media
- Substance supplied to that use in form of:
- in a mixture
- Subsequent service life relevant for this use:
- yes
- Related assessment:
- use assessed in a joint CSR but not a lead’s own use
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)