Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 204-260-8 | CAS number: 118-56-9
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu./o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_toxicological-information.png)
Skin irritation / corrosion
Administrative data
- Endpoint:
- skin irritation: in vitro / ex vivo
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- 14.05.2012 - 21.08.2012
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- other: OECD guideline study performed according to GLP
Data source
Reference
- Reference Type:
- study report
- Title:
- Unnamed
- Year:
- 2 012
- Report date:
- 2012
Materials and methods
Test guidelineopen allclose all
- Qualifier:
- according to guideline
- Guideline:
- EU Method B.46 (In Vitro Skin Irritation: Reconstructed Human Epidermis Model Test)
- Qualifier:
- according to guideline
- Guideline:
- OECD Guideline 439 (In Vitro Skin Irritation: Reconstructed Human Epidermis Test Method)
- GLP compliance:
- yes (incl. QA statement)
Test material
- Reference substance name:
- Homosalate
- EC Number:
- 204-260-8
- EC Name:
- Homosalate
- Cas Number:
- 118-56-9
- Molecular formula:
- C16H22O3
- IUPAC Name:
- 3,3,5-trimethylcyclohexyl salicylate
Constituent 1
Test animals
- Species:
- other: seeded human epidermal keratinocytes
- Strain:
- other: supplied by SkinEthic Laboratories, Lyon, France
- Details on test animals or test system and environmental conditions:
- The EPISKIN™ model is a three-dimensional reconstructed human epidermis model consisting of adult human-derived epidermal keratinocytes seeded on a dermal substitute consisting of a collagen type I matrix coated with type IV collagen. A highly differentiated and stratified epidermis model is obtained after a 13-Day culture period comprising of the main basal, supra basal, spinous and granular layers and a functional stratum corneum.
Test system
- Type of coverage:
- other: EPISKIN model
- Preparation of test site:
- not specified
- Vehicle:
- unchanged (no vehicle)
- Controls:
- other: sodium dodecyl sulphate (SDS) 5% as positive control
- Amount / concentration applied:
- 10 µL of the undiluted test item were applied to each of triplicate tissues.
For the positive and negative controls also each 10 µL were dosed per tissue. - Duration of treatment / exposure:
- The negative and positive control, and the test item were added into the insert atop the concerning EpiSkin™ triplicate tissues. The 12-well plates were placed into the incubator for 15 min at 37 ±1.5 °C, 5 ±0.5% CO2 .
- Observation period:
- After the end of the treatment interval the inserts were removed immediately from the 12-well plate. Using a wash bottle the tissues were gently rinsed with PBS to remove any residual test material. Excess PBS was removed by gently shaking the inserts and blotting the bottom with blotting paper. The inserts were placed in the plates with 2 mL maintenance medium. The tissues were incubated for approximately 42 hours at 37 ±1.5 °C, 5 ±0.5% CO2 .
- Number of animals:
- not relevant, measurements were made in triplicates for negative control, positive control and test item.
- Details on study design:
- The MTT concentrate was thawed on the day of testing and diluted with the MTT diluent. A 12-well plate was filled with 2 mL assay medium containing 0.3 mg/mL MTT per well.
After the treatment procedure was completed for all tissues of each time point cell culture inserts were transferred from the holding plates to the MTT-plates. After a 3 hour incubation period (37 ± 1.5 °C, 5 ± 0.5% CO 2 ) MTT solution was aspirated from the wells and the wells were rinsed three times with PBS. Tissue samples were cut out of the inserts with a biopsy punch and transferred into plastic vials. The tissue samples were immersed into extractant solution by gently pipetting 0.5 mL extractant solution (isopropanol / 2 N HCl 49:1 (v/v)) into each vial. The tissue samples were completely covered by isopropanol. The vials were sealed to inhibit isopropanol evaporation. The formazan salt was extracted for about 72 hours in the refrigerator.
Per each tissue sample 2 x 200 µL aliquots of the formazan blue solution were transferred into a 96-well flat bottom microtiter plate. OD was read in a microplate reader (Versamax ® Molecular Devices, 85737 Ismaning, Germany) with 570 ± 1 nm filter. Mean values were calculated from the 2 wells per tissue sample.
Some test chemicals may reduce MTT, which will result in a blue colour without any involvement of cellular mitochondrial dehydrogenase. Although in the present assay the test chemicals were rinsed off and the medium beneath the tissues was replaced before contact with MTT medium, some amount of a test chemical may be released by the tissues into the MTT medium and directly reduce the MTT, which would be interpreted as "tissue viability". MTT reducing capability of the test item was tested as described in section “9.5 Test for Direct MTT Reduction”.
Results and discussion
In vitro
Results
- Irritation / corrosion parameter:
- other: other: Relative absorbance (% of negative control)
- Value:
- 108.9
- Remarks on result:
- other:
- Remarks:
- Basis: other: absorbance of negative control. Time point: 6 days following incubation. Max. score: 100.0. Reversibility: other: not applicable. (migrated information)
Any other information on results incl. tables
Quality criteria
The absolute OD 570 nm of the negative control tissues in the MTT test is an indicator of tissue viability obtained after the shipping and storing procedure and under specific conditions of the assay. Tissue viability meets the acceptance criterion if the mean OD of the three tissues is ≥ 0.6 till ≤ 1.5. The standard deviations in between tissues of the same treatment group should be ≤ 18%. An assay meets the acceptance criterion if mean relative tissue viability of the positive control is ≤ 40%. The data of the quality control (determined by SkinEthic Laboratories, 69007 Lyon, France) of the respective EpiSkin™ lot is mentioned in the present report (the acceptance limit of the IC 50 should be between 1.0 and 3.0 mg/mL after 18 hours treatment with SLS). The historical data (means, standard deviation, and ranges) of the positive control as well as for the negative control obtained with the EpiSkin™ model at Harlan CCR are mentioned in the report.
Applicant's summary and conclusion
- Interpretation of results:
- not irritating
- Remarks:
- Migrated information Criteria used for interpretation of results: EU
- Conclusions:
- The test item was considered to be Non-Irritant (NI) in this human epidermis skin model test.
- Executive summary:
The relative mean absorbance of the test item treated tissues was 108.9% (relative to negative control) after a 15-Minute exposure period. Thus, the test substance had no effect on viability and the substance is considered non-irritant.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)