Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 601-147-9 | CAS number: 111988-49-9
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu./o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_environmental-fate-and-pathways.png)
Adsorption / desorption
Administrative data
Link to relevant study record(s)
- Endpoint:
- adsorption / desorption: screening
- Type of information:
- experimental study
- Adequacy of study:
- key study
- Study period:
- Dec 1993 - Feb 1994
- Reliability:
- 1 (reliable without restriction)
- Rationale for reliability incl. deficiencies:
- guideline study
- Qualifier:
- according to guideline
- Guideline:
- other: (U.S.) Environmental Protection Agency, Pesticide Assessment Guidelines, Subdivision N, Chemistry: Environmental Fate, § 163-1 Leaching and Adsorption/Desorption Studies
- Version / remarks:
- 1988
- GLP compliance:
- yes (incl. QA statement)
- Type of method:
- batch equilibrium method
- Media:
- soil
- Radiolabelling:
- yes
- Test temperature:
- 20 ± 1°C
- Analytical monitoring:
- yes
- Details on sampling:
- - Concentrations: The adsorptions/desorption measurements were carried out with 4 different concentrations of active ingredient corresponding to 0.130 mg, 0.099 mg, 0.065 mg and 0.013 mg test substance/L CaCl2-solution.
- Sampling interval: Treated with the application solutions of different concentrations, samples were processed after shaking for 24 hours. - Matrix no.:
- #1
- Matrix type:
- other: Sandy loam; soil identification: Borstel, Germany
- % Clay:
- 6.9
- % Silt:
- 21.5
- % Sand:
- 71.6
- % Org. carbon:
- 1.15
- pH:
- 6.3
- Matrix no.:
- #2
- Matrix type:
- other: Sandy loam; soil identification: Howe, IN
- % Clay:
- 8.2
- % Silt:
- 26.3
- % Sand:
- 65.5
- % Org. carbon:
- 0.75
- pH:
- 7.1
- Matrix no.:
- #3
- Matrix type:
- other: Silt clay loam; soil identification: Stanley, KS
- % Clay:
- 42
- % Silt:
- 41
- % Sand:
- 17
- % Org. carbon:
- 1.05
- pH:
- 5.6
- Matrix no.:
- #4
- Matrix type:
- other: Sand; soil identification: Vero Beach, FL
- % Clay:
- 1
- % Silt:
- 0.3
- % Sand:
- 98.7
- % Org. carbon:
- 0.2
- pH:
- 5.1
- Matrix no.:
- #5
- Matrix type:
- other: Sandy loam; soil identification: Graoe Vineyard, CA
- % Clay:
- 5.9
- % Silt:
- 30.2
- % Sand:
- 64
- % Org. carbon:
- 0.45
- pH:
- 6.7
- Matrix no.:
- #6
- Matrix type:
- other: Loam; soil identification: Napa, CA
- % Clay:
- 24.1
- % Silt:
- 48.1
- % Sand:
- 27.8
- % Org. carbon:
- 0.99
- pH:
- 7.7
- Details on matrix:
- COLLECTION AND STORAGE
- Geographic location: The tests were carried out using the following soils: Borstel from Borstel near Hannover, Germany (sandy loam); Howe from Indiana, USA (sandy loam); Stanley from Kansas, USA (silty clay loam); Vero Beach from Florida, USA (sand); Grape Vineyard from California, USA (sandy loam); Napa from California, USA (loam)
- Sampling depth (cm): Samples were taken from the top soil layers (0-30 cm).
- Storage conditions: The soil Borstel was removed from the field on June 21, 1991 and stored in the climatic cabinet at +4°C in the dark. The soils Stanley, Vero Beach, Grape Vineyard and Napa were obtained from Miles Inc, South Metcalf, Stillwell, KS (USA) before the beginning of the test. The soil Howe is kept in wooden boxes under vegetation in the field and was removed before the beginning of the test.
- Soil preparation (e.g.: 2 mm sieved; air dried etc.): The soil moisture was determined in all soils after screening to < 2 mm.
PROPERTIES
- Soil texture: Information on the soil properties may be taken from the Table “Matrix properties”. - Details on test conditions:
- TEST CONDITIONS
Adsorption measurements:
- The adsorptions/desorption measurements were carried out with 4 different concentrations of active ingredient corresponding to 0.130 mg, 0.099 mg, 0.065 mg and 0.013 mg test substance/L CaCl2-solution.
- Mercury chloride (50 mg HgCl2/L) was added to the applications solutions as biocide in order to prevent a possible biotic degradation of the active ingredient. Additional adsorption/desorption measurements without addition of mercury were carried out with the highest concentration of active ingredient for control purposes (individual determinations).
- Portions of 6 g each (relative to dry weight) of the soils were weighed into centrifuge tubes, treated with the application solutions of different concentrations and shaken for 24 hours.
Desorption measurements:
- The remaining soil was treated with 20 ml 0.01 M CaCl2-solution (stock solution I) and shaken once for another 24 hours.
- After centrifugation (15 minutes, about 6000 g) the radioactivity content of the clear supernatant was determined.
- This desorption step was carried out a total of 4 times at the highest concentration (0.130mg/L) in each case.
- The content of unchanged parent compound was determined chromatographically from the solution of the highest concentration of active ingredient of the first desorption step. The radioactivity measurement of the soil was carried out by combustion. - Sample No.:
- #1
- Duration:
- 24 h
- Initial conc. measured:
- > 0.013 - < 0.13 other: mg/L CaCl2
- pH:
- 6.3
- Temp.:
- 20 °C
- Sample No.:
- #2
- Duration:
- 24 h
- Initial conc. measured:
- > 0.013 - < 0.13 other: mg/L CaCl2
- pH:
- 7.1
- Temp.:
- 20 °C
- Sample No.:
- #3
- Duration:
- 24 h
- Initial conc. measured:
- > 0.013 - < 0.13 other: mg/L CaCl2
- pH:
- 5.6
- Temp.:
- 20 °C
- Sample No.:
- #4
- Duration:
- 24 h
- Initial conc. measured:
- > 0.013 - < 0.13 other: mg/L CaCl2
- pH:
- 5.1
- Temp.:
- 20 °C
- Sample No.:
- #5
- Duration:
- 24 h
- Initial conc. measured:
- > 0.013 - < 0.13 other: mg/L CaCl2
- pH:
- 6.7
- Temp.:
- 20 °C
- Sample No.:
- #6
- Duration:
- 24 h
- Initial conc. measured:
- > 0.013 - < 0.13 other: mg/L CaCl2
- pH:
- 7.7
- Temp.:
- 20 °C
- Sample no.:
- #1
- Duration:
- 24 h
- Conc. of adsorbed test mat.:
- 0.13 other: mg/L CaCl2
- pH:
- 6.3
- Temp.:
- 20 °C
- Remarks:
- This desorption step was carried out a total of 4 times at the highest concentration (0.130 mg/L CaCl2) for each soil.
- Sample no.:
- #2
- Duration:
- 24 h
- Conc. of adsorbed test mat.:
- 0.13 other: mg/L CaCl2
- pH:
- 7.1
- Temp.:
- 20 °C
- Remarks:
- This desorption step was carried out a total of 4 times at the highest concentration (0.130 mg/L CaCl2) for each soil.
- Sample no.:
- #3
- Duration:
- 24 h
- Conc. of adsorbed test mat.:
- 0.13 other: mg/L CaCl2
- pH:
- 5.6
- Temp.:
- 20 °C
- Remarks:
- This desorption step was carried out a total of 4 times at the highest concentration (0.130 mg/L CaCl2) for each soil.
- Sample no.:
- #4
- Duration:
- 24 h
- Conc. of adsorbed test mat.:
- 0.13 other: mg/L CaCl2
- pH:
- 5.1
- Temp.:
- 20 °C
- Remarks:
- This desorption step was carried out a total of 4 times at the highest concentration (0.130 mg/L CaCl2) for each soil.
- Sample no.:
- #5
- Duration:
- 24 h
- Conc. of adsorbed test mat.:
- 0.13 other: mg/L CaCl2
- pH:
- 6.7
- Temp.:
- 20 °C
- Remarks:
- This desorption step was carried out a total of 4 times at the highest concentration (0.130 mg/L CaCl2) for each soil.
- Sample no.:
- #6
- Duration:
- 24 h
- Conc. of adsorbed test mat.:
- 0.13 other: mg/L CaCl2
- pH:
- 7.7
- Temp.:
- 20 °C
- Remarks:
- This desorption step was carried out a total of 4 times at the highest concentration (0.130 mg/L CaCl2) for each soil.
- Computational methods:
- The adsorption coefficient K as a measure for the adsorption behavior was described by the adsorption isotherm according to Freundlich.
In x/m = 1/n In C + In K
In this equation x is the amount of active ingredient (µg) adsorbed to the soil, m is the amount of soil (g) and C is the equilibrium concentration of the active ingredient in the aqueous solution (µg/mL). - Sample No.:
- #1
- Type:
- Koc
- Value:
- 393 L/kg
- pH:
- 6.3
- Temp.:
- 20 °C
- Matrix:
- Borstel
- % Org. carbon:
- 1.15
- Sample No.:
- #2
- Type:
- Koc
- Value:
- 753 L/kg
- pH:
- 7.1
- Temp.:
- 20 °C
- Matrix:
- Howe
- % Org. carbon:
- 0.75
- Sample No.:
- #3
- Type:
- Koc
- Value:
- 522 L/kg
- pH:
- 5.6
- Temp.:
- 20 °C
- Matrix:
- Stanley
- % Org. carbon:
- 1.05
- Sample No.:
- #4
- Type:
- Koc
- Value:
- 572 L/kg
- pH:
- 5.1
- Temp.:
- 20 °C
- Matrix:
- Vero Beach
- % Org. carbon:
- 0.2
- Sample No.:
- #5
- Type:
- Koc
- Value:
- 870 L/kg
- pH:
- 6.7
- Temp.:
- 20 °C
- Matrix:
- Grape Vineyard
- % Org. carbon:
- 0.45
- Sample No.:
- #6
- Type:
- Koc
- Value:
- 582 L/kg
- pH:
- 7.7
- Temp.:
- 20 °C
- Matrix:
- Napa
- % Org. carbon:
- 0.99
- Remarks on result:
- other:
- Remarks:
- Please see "Appendices 6-11" in the Attached backgound material.
- Remarks on result:
- other:
- Remarks:
- Please see "Appendices 6-11" in the Attached backgound material.
- Transformation products:
- not specified
- Details on results (Batch equilibrium method):
- PRELIMINARY TEST
- The preliminary test showed in all soils a low dependence of the adsorption rate from the soil/water ratio. Based on these results the weighed amounts of soil were defined for all soils to be 6 g and the amount of shaking solution was defined to be 20 ml for the further tests.
- The time for the establishment of the equilibrium between the test substance concentration in the solution and the part being adsorbed to the soil phase was determined in a preliminary test. The time until achievement of the equilibrium is defined as the time span from the beginning of the test until the point of time at which the concentration of the solution remains constant within an interval of 24 hours or does not change by more than 5%. The results show that an equilibrium has been established already after a short period of time (Appendix 5). In the main test for the determination of the adsorption/desorption data a uniform shaking period of 24 hours was defined for all soils.
MAIN TEST: PERFORMANCE
- Other observations: The shaking tests with the application solution without addition of soil (mean recovery = 98%) and the total accountabilities (4.2 establishment of the equilibrium) with recovery rates between 98.5% and 102.9% show that no essential adsorption occurred at the walls of the sample vessels.
TRANSFORMATION PRODUCTS
- The chromatographic analysis of the clear centrifuged supernatants of the soils after establishment of the equilibrium showed that almost the entire measured radioactivity (> 98%) could be assigned to the unchanged parent compound.
- Between 85% and 94% of the measured radioactivity only could be determined as parent compound (TLC).
RESIDUES
- Extractable residues (% of applied amount at end of study period): The proportion of active ingredient being adsorbed to soil Borstel ranged from 68% to 76% as a function of the applied concentrations of active ingredient (Appendix 6), that of soil Howe ranged from 74% to 81% (Appendix 7), that of soil Stanley from 67% to 70% (Appendix 8), that of soil Vero Beach from 30 to 34% (Appendix 9), that of soil Grape Vineyard from 64% to 71% (Appendix 10) and that of soil Napa from 76% to 83% (Appendix 11). The Appendices 6 – 11 are provided in the “Attached background material”.
- An average of 2-4% less radioactivity were adsorbed to all soils in the control tests without addition of biocide HgCh (highest concentration of active ingredient).
- The Koc values of the adsorption phase ranged from 393 to 870 among the different soils.
- The Koc values of the desorption phase ranged from 491 to 1009 among the different soils.
- The desorption tests showed desorption rates of 15-67% as a function of the respective concentrations of active ingredient (Appendices 6-11). - Validity criteria fulfilled:
- not applicable
Reference
Description of key information
logKoc = 2.59 – 2.94 L/kg (geom. mean: 2.78 L/kg)
Key value for chemical safety assessment
- Koc at 20 °C:
- 596
Additional information
In an experimental study following GLP and “(U.S.) Environmental Protection Agency, Pesticide Assessment Guidelines, Subdivision N, Chemistry: Environmental Fate, § 163-1 Leaching and Adsorption/Desorption Studies”, Freundlich adsorption constants of (Z)-3-(6-chloro-3-pyridylmethyl)-1,3-thiazolidin-2-ylidenecyanamide related to organic carbon content (Koc) ranged from 393 to 870 L/kg (geom. mean: 596 L/kg). logKoc = 2.59 – 2.94 L/kg.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)