Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 308-516-0 | CAS number: 98072-61-8
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu./o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_ecotoxicological-information.png)
Ecotoxicological Summary
Administrative data
Hazard for aquatic organisms
Hazard for air
Hazard for terrestrial organisms
Hazard for predators
Additional information
Nickel
The approach for deriving PNEC values was used in the 2008/2009 European Union Existing Substances Risk Assessment of Nickel (EU RAR) (EEC 793/93). The EU RAR was jointly prepared by the Danish Environmental Protection Agency (DEPA), which served as the Rapporteur of the Existing Substances Risk Assessment of Nickel, and the Nickel Producers Environmental Research Association (NiPERA), which represented the Nickel Industry in this process. The complete Environment section of the EU RAR can be found in the pdf linked to the following URL:
http://ecb.jrc.ec.europa.eu/DOCUMENTS/Existing-Chemicals/RISK_ASSESSMENT/REPORT/nickelreport311.pdf
All of the approaches described were discussed by the Technical Committee for New and Existing Substances (TC NES), and received final approval at the TC NES I meeting in April, 2008.
Common effects assessment basis:
The ecotoxicity databases on the effects of soluble nickel compounds to aquatic, soil- and sediment-dwelling organisms are extensive. It should be noted that the effects assessments of Nickel metal is based on the assumption that adverse effects to aquatic, soil- and sediment-dwelling organisms are a consequence of exposure to the bioavailable Ni-ion, as opposed to the parent substances. The result of this assumption is that the ecotoxicology will be similar for all soluble Ni substances used in the ecotoxicity experiments. Therefore, data from soluble nickel substances are used in the derivation of chronic ecotoxicological NOEC and L(E)C10 values. If both NOEC and L(E)C10 data are available for a given species, the L(E)C10 value was used in the effects assessment.
Conclusion on classification
- Ecotoxicity data used to determine acute and chronic Ecotoxicity Reference Values (ERVs) of soluble Ni2+;
- Results of Transformation/Dissolution Protocol (T/D P) testing with nickel metal powder;
- Comparison of Ni dissolution from T/D P studies with relevant ERVs to determine the appropriate classification; and,
- The use of the Critical Surface Approach to distinguish between Ni metal powder and Ni metal massive.
Nickel
Classification of Nickel Metal Massive and Nickel Metal Powder
Nickel metal massive was assigned no classification for aquatic toxicity based on comaprison of the transformation/dissolution data for nickel metal granules with the acute and chronic ecotoxicity reference values (ERVs) for soluble nickel, in accordance with the aquatic toxicity classification schemes for metals and metal compounds
described in European Union (EU) and United Nations Globally Harmonized System of Classification and Labelling of Chemicals (GHS) (United Nations, 2003).
For nickel metal powder a position paper entitled “Aquatic Toxicity Classification of Nickel Metal Powder” was prepared by the Nickel Producers Environmental Research Association (NiPERA). The paper was discussed at the European Chemical Bureau’s Commission Working Group on the Classification and Labelling of Dangerous Substances, which took place on April 26-27, 2006. The recommended classification from the DK Rapporteur and the Working Group was the same as that of NiPERA.
The NiPERA position paper presents information that supports the aquatic classification of nickel metal powder (particle size diameter < 1 mm) asAcute III/Chronic IIIin the International UN GHS system and asN; R52/53in the EU DSD system. These are the classifications that have been reported in the 1st ATP to the CLP Regulation. Acute III/Chronic IIIin the International UN GHS system is equivalent to Chronic III in the European Union GHS system (CLP Regulation).
The NiPERA paper specifically includes the following information:
Derivation of the Classification for nickel metal powder
The aquatic toxicity classification for nickel metal powder can be derived by comparing the transformation/dissolution data for nickel metal powder with the acute and chronic toxicity reference values for soluble nickel compounds. This approach is outlined in the classification schemes for metals and metal compounds described in European Union (EU) and United Nations Globally Harmonized System of Classification and Labelling of Chemicals (GHS) (United Nations, 2003).
Transformation-Dissolution Data
Acute (7 day) and chronic (28 day) transformation/dissolution (T/D) data for nickel metal powder were collected. 7 d T/D P tests included testing at 1, 10, and 100 mg/L loading rates, whereas 28 d T/D P testing was performed at the 1 mg/L loading rate. All duration/loading rates were performed at both pH 6 and 8.
Acute Toxicity Reference Value
In order to assess acute toxicity classification, low and high pH acute toxicity reference values are needed to compare to the existing T/D data at pH 6 and 8, respectively. The acute toxicity reference value chosen for high pH was 0.068 mg Ni/L [same value proposed by the Danish EPA in document ECBI/26/95 Add. 76], which is the geometric mean of the 6 Ceriodaphnia dubia ecotoxicity (LC50) values in the pH range of 8.3-8.7 and hardness range of 258-290 mg/L as CaCO3(Schubauer-Berigan et al. 1993; Parametrix 2005a; Parametrix 2005b).
The lowest ecotoxicity value at pH 6, which is 0.012 mg Ni/L for the alga Pseudokirchneriella subcapitata (Deleebeecket al., 2004), was chosen as the ecotoxicity reference value for comparison of the T/D data at pH 6.
Chronic Toxicity Reference Value
Currently, the EU DSD classification system uses the most sensitive NOEC/EC10value available as the chronic Ecotoxicity Reference Value. The chronic toxicity reference value was chosen to be the EC10of 0.0024 mg Ni/L calculated by Parametrix (2004) [same value proposed by the Danish EPA in document ECBI/26/95 Add. 76] since: this value was derived at a pH slightly higher (pH 8.4), but similar to that of the high pH T/D data (pH 8), the pH of the study was approximately at the high pH limit (pH 8.5) for chronic T/D testing, the hardness conditions are similar to that of the T/D medium at pH 8, and a calculated EC10is appropriate to use when the NOEC value was not measured (a less than value).
Aquatic Toxicity Classification
Aquatic toxicity classification can be assigned to a nickel sample by comparing the transformation/dissolution (T/D) results with the acute and chronic toxicity reference values for similar conditions using the EU and GHS classification schemes for metals and metal compounds.
For 7 day Ni metal powder T/D P data, the only loading rate at which dissolved Ni concentrations exceeded the acute ERVs was at 100 mg/L. Dissolution of 100 mg/L @ pH 6 was 0.35 mg/L, which exceeded the pH 6 ERV of 0.12 mg/L (dissolution of 10 mg/L @pH 6 was 0.024 mg/L). Likewise, dissolution of 100 mg/L @ pH 8 was 0.28 mg/L, which exceeded the pH 8 ERV of 0.068 mg/L (dissolution of 10 mg/L @ pH 8 was 0.029 mg/L).
For the 28 d test using 1 mg/L loading, dissolution was 0.0023 mg/L at pH 6, and 0.0035 mg/L at pH 8. The pH 8 dissolution of 0.0035 mg/L exceeded the chronic ERV of 0.0024 mg/L.
Based on these results, the appropriate classification is R52/53 in the EU DSD system,Acute III/Chronic III in the International GHS systemand Chronic III in the EU GHS system.
Critical Surface Area (CSA) Approach
An alternative approach to deriving the classification of R52-53 for nickel metal powder is the Critical Surface Area (CSA) Approach, described by Skeaffet al. (2000) and the MERAG (Metal Environmental Risk Assessment Guideline) fact sheet on classification (MERAG 2007), as well as referred to in the GHS under paragraph A8.7.5.4.4 (United Nations, 2003). The CSA Approach utilizes both the transformation/dissolution data and toxicity reference values to determine acute and chronic classification, as does the current EU and GHS classification systems, but the CSA Approach enables determination of classification based on surface area and equivalent spherical particle diameters.
Acute Toxicity:
The CSA Approach can be used to assign an acute classification to nickel metal powder based on measured surface area using the measured surface area of 0.43 m2/g for the smallest representative size powder on the EU market. Since this surface area is greater than 0.1 m2/g but less than 1 m2/g, the acute classification for nickel metal powder would be R52. The CSA Approach can also be used to classify nickel metal massive, where the measured surface area of the CERAC granules[1](representative of nickel massives) is 0.086 m2/g. This surface area is less than all of theSAcritso there would be no acute classification for nickel metal massive. These acute classification conclusions for nickel metal powder and massive are consistent with the EU and GHS classification approaches described above.
Chronic Toxicity:
The CSA Approach can be used to assign a chronic classification to nickel metal powder based on measured surface area using the measured surface area of 0.43 m2/g for the smallest representative size powder on the EU market. Since this surface area is greater than 0.342 m2/g, nickel metal powder would be classified as R53. The CSA Approach can also be used to classify nickel metal massive, where the measured surface area of the CERAC granules1(representative of nickel massives) is 0.086 m2/g. This surface area is less than the chronicSAcritso there would be no chronic classification for nickel metal massive. These chronic classification conclusions for nickel metal powder and massive are consistent with the EU and GHS classification approaches described above.
Conclusions
Nickel metal powder should be classified as N; R52-53using the data presented above in the EU DSD classification system for metals and metal compounds. This is equivalent to a classification of Aquatic Chronic III in the EU GHS classification system, as classified in the 1stATP to the CLP Regulation.
Nickel metal powder including a Nickel oxide impurity should also be classified as N; R52-53in the EU DSD classification system and Aquatic Chronic III in the EU GHS classification system. No change to the Environmental Classification will result from the Nickel oxide impurity because Nickel oxide is classified as Aquatic Chronic IV in the 1stATP to the CLP Regulation, which is less stringent than the classification for Nickel metal powder.
Nickel metal massive are not classified in the EU DSD or EU GHS aquatic classification systems for metals and metal compounds based on transformation/dissolution data for nickel metal massive being less than the acute and chronic ERVs.
The 2ndATP to the CLP introduced the chronic (long-term) environmental toxicity endpoint as defined by the 3rdversion of the UN-GHS into the EU hazard classification and labeling scheme. The GHS and EU scheme include the concept of degradation whereby rapid degradation from the water column (greater than 70 % removal in 28 days) results in different classification cut-off values and categories. For metals and inorganic metal compounds, the rapid and irreversible removal from the water column is equated to the rapid degradation concept for organics. The current draft guidance on metals includes a proposal to apply the “rapid degradation principle for organics” measured as a 70 % removal rate in 28 days in a comparable way for metals from laboratory and field experiments or by using a recently developed model. A Unit World Model (UWM) has recently been developed specifically for metals, building on previous screening-level calculations that have been developed for organic contaminants, and is capable of assessing the fate and effects of chemicals by the simultaneous consideration of chemical partitioning, transport, reactivity, and bioavailability. With regard to hazard assessment, the UWM is capable of assessing the removal of soluble metals from the water column resulting from sorption to particulate material, settling to the sediment compartment, and subsequent changes in speciation via precipitation by sulfides naturally present in the sediment compartment.
The UWM was used to assess the rapid removal of a group metals (e.g., Ni, Cu, Pb, Zn, As, Al, Co) in a generalized lake environment resulting from metal removal from the water column and sequestration in sediment. To estimate sorption by particulate matter in the water column, the UWM can use empirical, measured distribution coefficients (Kd), or the speciation module within the UWM (the Windermere Humic Aqueous Model, or WHAM) can calculate Kds. When an empirical Kd of log 4.42 was used, greater than 70% nickel removal was achieved in every loading and pH scenario. WHAM-based Kds tended to be substantially lower than empirical Kds, indicating that refinement of the WHAM approach was needed. To this end, the UWM was refined to accommodate an updated version of WHAM (WHAM 7). Additionally, the inorganic thermodynamic database used by WHAM to perform speciation calculations was updated because the previous version was found to be out of date and inaccurate. Analyses using WHAM7 and the revised inorganic thermodynamic database showed that greater than 70% nickel removal was achieved under the three pH scenarios with metal loadings at the acute and chronic ERVs at 28 days. At the upper chronic cutoff value of 1 mg/L, rapid removal was achieved for pH 6 and 8 without oxide binding and for all three pH values with oxide binding. Rapid removal was demonstrated at all pH values when loading was based on acute Ecotoxicity Reference Values (120 µg Ni/L at pH 6 and 68 µg Ni/L at pH 8) and chronic Ecotoxicity Reference Values (2.4 µg Ni/L) using calculated Kd values. Based on these results, nickel metal fulfills the criteria for rapid degradation for the environmental classification scheme in the 2ndATP to the CLP.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)