Registration Dossier
Registration Dossier
Data platform availability banner - registered substances factsheets
Please be aware that this old REACH registration data factsheet is no longer maintained; it remains frozen as of 19th May 2023.
The new ECHA CHEM database has been released by ECHA, and it now contains all REACH registration data. There are more details on the transition of ECHA's published data to ECHA CHEM here.
Diss Factsheets
Use of this information is subject to copyright laws and may require the permission of the owner of the information, as described in the ECHA Legal Notice.
EC number: 292-966-7 | CAS number: 91031-62-8
- Life Cycle description
- Uses advised against
- Endpoint summary
- Appearance / physical state / colour
- Melting point / freezing point
- Boiling point
- Density
- Particle size distribution (Granulometry)
- Vapour pressure
- Partition coefficient
- Water solubility
- Solubility in organic solvents / fat solubility
- Surface tension
- Flash point
- Auto flammability
- Flammability
- Explosiveness
- Oxidising properties
- Oxidation reduction potential
- Stability in organic solvents and identity of relevant degradation products
- Storage stability and reactivity towards container material
- Stability: thermal, sunlight, metals
- pH
- Dissociation constant
- Viscosity
- Additional physico-chemical information
- Additional physico-chemical properties of nanomaterials
- Nanomaterial agglomeration / aggregation
- Nanomaterial crystalline phase
- Nanomaterial crystallite and grain size
- Nanomaterial aspect ratio / shape
- Nanomaterial specific surface area
- Nanomaterial Zeta potential
- Nanomaterial surface chemistry
- Nanomaterial dustiness
- Nanomaterial porosity
- Nanomaterial pour density
- Nanomaterial photocatalytic activity
- Nanomaterial radical formation potential
- Nanomaterial catalytic activity
- Endpoint summary
- Stability
- Biodegradation
- Bioaccumulation
- Transport and distribution
- Environmental data
- Additional information on environmental fate and behaviour
- Ecotoxicological Summary
- Aquatic toxicity
- Endpoint summary
- Short-term toxicity to fish
- Long-term toxicity to fish
- Short-term toxicity to aquatic invertebrates
- Long-term toxicity to aquatic invertebrates
- Toxicity to aquatic algae and cyanobacteria
- Toxicity to aquatic plants other than algae
- Toxicity to microorganisms
- Endocrine disrupter testing in aquatic vertebrates – in vivo
- Toxicity to other aquatic organisms
- Sediment toxicity
- Terrestrial toxicity
- Biological effects monitoring
- Biotransformation and kinetics
- Additional ecotoxological information
- Toxicological Summary
- Toxicokinetics, metabolism and distribution
- Acute Toxicity
- Irritation / corrosion
- Sensitisation
- Repeated dose toxicity
- Genetic toxicity
- Carcinogenicity
- Toxicity to reproduction
- Specific investigations
- Exposure related observations in humans
- Toxic effects on livestock and pets
- Additional toxicological data
![](https://echa.europa.eu./o/diss-blank-theme/images/factsheets/A-REACH/factsheet/print_environmental-fate-and-pathways.png)
Endpoint summary
Administrative data
Description of key information
Additional information
- 7-days transformation/dissolution of a lead metal massive particle of 1mm diameter at a loading of 100 mg/L corresponds to a total release of 428.9 µg Pb/L at pH 6, 109 µg Pb/L at pH 7, and 29.99 µg Pb/L at pH 8.
- The results from 28-day transformation/dissolution of a lead metal massive particle of 1mm diameter, at pH 6, and a loading of 1 mg/L, corresponds to 14.2 µg Pb/L; at pH 7, the result was 2.0 µg Pb/L, and at pH8, the result was 0.66 µg Pb/L.
- The results are carried forward to Industry's self-classification of Pb metal in massive form.
- 24-hour screening test; 100 mg/L loading:
- pH 6: The release of lead was 3211.2 µg/L.
- pH 7: The release of lead was 607.0 µg/L.
- pH 8: The release of lead was 187.5 µg/L.
- Full T/Dp testing
- 7-day T/Dp test results; 1 mg/L loading:
- pH 6: The release of lead was 390 µg/L.
- pH 8: The release of lead was 68.5 µg/L.
- 28-day T/Dp test results; 1 mg/L loading:
- pH 6: The release of lead was 639 µg/L.
- pH 8: The release of lead was 134 µg/L.
- These results are carried forward to Industry's self-classification for Pb metal powder.
- 7-day T/Dp test results; 1 mg/L loading:
- log BSAF (kgdw soil/kgdw worm) = -0.89 * log eCEC (cmolc/kg) +0.55
- BSAF (kgdw soil /kgfw worm) = 0.16 * BSAF (kgdw soil/kgdw worm)
Lead is a natural element and post-transition metal with more than one oxidation state. Lead in its metallic form is not bioavailable. Lead needs to be transformed to its ionic forms to become available for uptake by living organisms.
The available reliable data selected for the environmental fate and behaviour of lead are all based on either monitoring data of prevailing lead concentrations in water, soil, sediment, suspended matter and organisms or on experimental results with lead (di) nitrate and lead chloride. All reliable data are expressed based on elemental Pb concentrations and grouped together in a read-across approach.
Stability and biodegradation
The classic standard testing protocols on hydrolysis and photo-transformation are not applicable to lead and inorganic lead compounds. This was recognised in the Guidance on the Application of the CLP Criteria (metal annex; ECHA, 2017):
“Environmental transformation of one species of a metal to another species of the same metal does not constitute “degradation” as applied to organic compounds and may increase or decrease the availability and bioavailability of the toxic species. In addition naturally occurring geochemical processes can partition metal ions from the water column while also other processes may remove metal ions from the water column (e.g. by precipitation and speciation). Data on water column residence time, the processes involved at the water – sediment interface (i.e. deposition and re-mobilisation) are fairly extensive for some metals. Using the principles and assumptions discussed above in section IV.1 of this document, it may therefore be possible to incorporate this approach into the classification”
As outlined in the Guidance on the Application of the CLP Criteria (ECHA, 2017), the understanding of the transformation of lead into more or less bioavailable species is relevant to the environmental hazard assessments and this is described below.
Transformation/dissolution of Pb°
Lead in its metallic form (Pb°) needs to be transformed to its ionic forms to become available for uptake by living organisms and therefore the rate and extend of the transformation/dissolution of lead in its massive and powder forms have been assessed from transformation/dissolution tests (in accordance to the OECD guidance, Annex 10 of the GHS). The data demonstrates that the release of soluble lead- ions from Pb° depends on various characteristics including metal forms (massive or powder), loading rates and pH. The release rate is higher at lower pH.
The results of the transformation/dissolution tests are described in details in “additional information fate and pathways” and are summarised as follows:
For massive lead materials, the transformation/dissolution test was carried out at pH 6, 7 and 8, in accordance to the OECD protocol on transformation/dissolution. The results were used to derive the release of lead-ions from 1 mm particles at loadings of 1,10 and 100 mg/L.
The lead massive was also tested on aged samples (subjected to 28 days of wet/dry cycles under standardised atmospheric conditions before testing) at pH 6, but the dissolution for the aged sample was comparable with that of the non-aged sample.
For lead metal powder, transformation/dissolution tests were carried out on fine lead metal powder (<75 µm,) in accordance with the OECD protocols: 24-hour screening testing was carried out at pH 6, 7 and 8, and full 7- and 28-day T/Dp testing was carried out at pH 6 (as Pb release was highest at this pH in the screeing test) and pH 8 (given that toxicity is higher at higher pH and moreover that ECHA CLP guidance requires pH-banded classification for data-rich substances such as lead):
Transformation of Pb-ions released in the environment –lead speciation
Once released to the environment, lead ions have more than one oxidation state and lead is characterised as ‘post-transition’ metal. The principal ionic form is Pb(II) (Pb2+), which is more stable than Pb(IV) (Pb4+). In all environmental compartments (water, sediment, soil), the binding affinities of Pb(II) with inorganic and organic matter is dependent on pH, the oxidation-reduction potential in the local environment, and the presence of competing metal ions and inorganic anions.
Lead attenuation, removal from water column, geochemical cycling- quantitative assessment
As described above, after the release of Pb(II) in the environment, further transformations occur thereby changing the potential for toxicity, induced by the free Pb(II) ions. The concentrations of “active” Pb(II) ions, that remains available for uptake by biota depends on different processes: precipitation, dissolution, adsorption, desorption, complexation and competition for biological adsorption sites (ligands). These processes are critical for the fate of lead in the environment. This was recognised in the Guidance on the Application of the CLP Criteria (metal annex; ECHA, 2017) as stated above.
The use of the Tableau Input Coupled Kinetics Equilibrium Transport (TICKET) model – Unit World Model (UWM) for evaluating removal of soluble metal species through precipitation/partitioning processes over a range of environmentally relevant conditions have been assessed for evaluating the removal of soluble lead species (equivalent to ‘rapid degradation” for organic compounds). The information is reported in the section "additional information on environmental fate" and summarised below:
-In the water compartment,lead is rapidly and strongly bound to the suspended solids of the water column. This binding and subsequent settling to the sediment allows for rapid metal removal of lead from the water column as demonstrated by a decrease in soluble lead concentrations by >70% in 28 days in a range of simulations according to the TICKET-UWM calculations (Rader et al., 2010). This information is reported in the section: additional information on environmental fate.
-In the sediment compartment,lead binds to the anaerobic sulphides resulting in the formation of PbS. The analysis was based on an AVS concentration between 1 and 9 µmol AVS/g. The results show that “insoluble” PbS keeps lead in the anaerobic sediment layers, limiting the potential for remobilisation of Pb-ions into the water column. The potential for remobilisation from oxic sediments, quantified by comparing water column lead concentrations resulting from sediment feedback to the 70% removal concentration was also insignificant. For conditions favoring remobilisation, water column dissolved lead concentrations at pseudo steady state were more than 100 times less than the 70% removal concentration.
All these results therefore suggest that Pb removel from the water column is rapid and its remobilisation from the sediment is relatively insignificant, supporting the removal of the “persistent” criterion for soluble lead salts. The relevant information is reported in the section“additional information on environmental fate”.
Transport and distribution
While lead is a naturally-occurring chemical, it is rarely found in its elemental form. It occurs in the Earth’s crust primarily as the mineral galena (PbS), and to a lesser extent as anglesite (PbSO4) and cerussite (PbCO3). Lead minerals are found in association with zinc, copper, and iron sulfides as well as gold, silver, bismuth, and antimony minerals. It also occurs as a trace element in coal, oil, and wood. Lead may enter the environment from both natural (weathering of soil, sea salt spray, volcanos) and anthropogenic sources (mining, ore processing, smelting, refining, recycling or disposal). In these processes, lead may be released to land, water, and air. In the atmosphere, non-organic compounds of lead exist primarily in the particulate form. The median particle distribution for lead emissions from smelters is 1.5 μm with 86% of the particle sizes under 10 μm (Corrin and Natusch 1977). The smallest lead-containing particulate matter (<1 μm) is associated with high-temperature combustion processes. Upon release to the atmosphere, lead particles are dispersed and ultimately removed from the atmosphere by wet or dry deposition.
The amount of soluble lead in surface waters depends upon the pH of the water and the dissolved salt content. Equilibrium calculations show that at pH >5.4, the total solubility of lead is approximately 30 μg/L in hard water and approximately 500 μg/L in soft water. Sulfate ions, if present in soft water, limit the lead concentration in solution through the formation of lead sulfate. Above pH 5.4, the lead carbonates, PbCO3 and Pb2(OH)2CO3, limit the amount of soluble lead.A significant fraction of lead carried by river water is expected to be in an undissolved form, which can consist of colloidal particles or larger undissolved particles of lead carbonate, lead oxide, lead hydroxide,or other lead compounds incorporated in other components of surface particulate matters from runoff. Lead may occur either as sorbed ions or surface coatings on sediment mineral particles, or it may be carried as a part of suspended living or nonliving organic matter in water. The fate of lead in soil is affected by the adsorption at mineral interfaces, the precipitation of sparingly soluble solid forms of the compound, and the formation of relatively stable organic-metal complexes or chelates with soil organic matter. These processes are dependent on such factors as soil pH, soil type, particle size, organic matter content of soil, the presence of inorganic colloids and iron oxides, cation exchange capacity (CEC), and the amount of lead in soil. In soil, lead can slowly undergo speciation to the more insoluble sulfate, sulfide, oxide, and phosphate salts. From the literature overview, the following partitioning coefficients (median values) have been derived for Pb:
- Aquatic compartment
Partition coefficient in freshwater suspended matter: Kd susp= 295,121 L/kg
Partition coefficient in freshwater sediment: Kd sed, fw = 153,848 L/kg
Partition coefficient in marine sediment: Kd sed, mar = 457,088 L/kg
Partition coefficient in estuarine suspended matter: Kd susp= 667,954 L/kg
Partition coefficient in marine suspended matter: Kd susp= 1,518,099 L/kg
- Soil compartment
Median partitioning coefficient: Kd soil: 6,400 L/kg
Bioaccumulation
Secondary poisoning results when toxicant concentrations in an organism reach a level that is toxic to the organisms that feed on it. Substances that bioaccumulate or biomagnify in food webs often are considered to have the greatest potential to cause secondary poisoning. It has been reported that the classic concept of biomagnification and food chain poisoning, based primarily on organic chemicals does not hold for metals. This may be explained in part by the limited bioavailability of the inorganic forms of metals in food and by the regulation of metals that occurs in both aquatic and terrestrial organisms.
Lead is not an essential nutrient, but the observed inverse relationship between the Pb internal concentration and the external concentration indicates that Pb is actively regulated.Within the typical environmental concentration range, the gathered BAFs for fish ranged between 11 and 143 L/kgww(median 23 L/kgww) while the BAFs for molluscs ranged between 18 and 3,850 L/kgww(median 675 L/kgww), for insects between 968 and 4,740 L/kgww(median 1,830 L/kgww) and for crustaceans between 1,583 and 11,260 L/kgww(median 3,440 L/kgww). Lead therefore poses the highest risk to insects and crustaceans, compared to fish or molluscs. The BAF value of 1,553 L/kgww(50th% of the mixed diet BAF for aquatic organisms) is further used for the assessment of secondary poisoning in the aquatic environment.
The biota-to-soil accumulation factor (BSAF) for earthworms in soil is dependent on the effective cation exchange capacity (eCEC) of the soil:
For comparison with the PNECoral for birds and mammals, this BSAF must be expressed on a fresh weight basis. The conversion of dry weight to fresh weight is based on an average dry matter of 16% in earthworms (Jager 1998):
A generic BSAF factor of 0.048 (fresh weight) is derived for a soil with a median eCEC of 16 cmolc/kg soil. Fresh-weight based BSAF values for a soil with an eCEC of 8 and 30 cmolc/kg soil, corresponding to the 10thand 90thpercentile of eCEC in European arable soils are 0.089 and 0.028, respectively.
More detailed summaries on respectively aquatic and terrestrial bioaccumulation are available from the aquatic and terrestrial bioaccumulation summary sections.
Information on Registered Substances comes from registration dossiers which have been assigned a registration number. The assignment of a registration number does however not guarantee that the information in the dossier is correct or that the dossier is compliant with Regulation (EC) No 1907/2006 (the REACH Regulation). This information has not been reviewed or verified by the Agency or any other authority. The content is subject to change without prior notice.
Reproduction or further distribution of this information may be subject to copyright protection. Use of the information without obtaining the permission from the owner(s) of the respective information might violate the rights of the owner.
![ECHA](/o/diss-blank-theme/images/factsheets/A-REACH/factsheet/echa_logo.png)