|
FCM |
Category 1: Ceramic articles which cannot be filled and articles which can be filled, the internal depth of which, measured from the lowest point to the horizontal plane passing through the upper rim, does not exceed 25 mm
|
|
Notes |
1 Where a ceramic article consists of a vessel fitted with a ceramic lid, the lead and/or cadmium limit which may not be exceeded (mg/dm2 or mg/litre) shall be that which applies to the vessel alone.
2 Where a ceramic article does not exceed the quantities by more than 50 %, that article shall be recognized as satisfying the requirements of this Directive if at least 3 other articles with the same shape, dimensions, decoration and glaze are subjected to a test under the conditions laid down in Annexes I and II and the average quantities of lead and/or cadmium extracted from those articles do not exceed the limits set, with none of those articles exceeding those limits by more than 50 %.
|